Advertisement
ABT-210 Bluetooth Transmitter
ABT-220 Bluetooth Receiver
VVM-230 Vocal Vibration Microphone
Bluetooth LED
Bluetooth
re-pair button
LED Display :
Bluetooth LED : Blue LED flashing quickly when turn on the power, the LED flashing
Power LED : Power LED always on after turn on the power
Battery LED : RED LED flashing when battery low
Audio Bluetooth Set
Power LED
slowly after connected.
Green LED flashing when battery poor contact or charging suspended
Green LED always on while charging battery
LED off when battery normal or battery fully charged
Manual
- 1 -
Battery LED
Laser Pointer
button
Laser pointer
indication
Laser Pointer
hole
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for ZyCast ABT-210
- Page 1 Audio Bluetooth Set Manual ABT-210 Bluetooth Transmitter ABT-220 Bluetooth Receiver VVM-230 Vocal Vibration Microphone Power LED Battery LED Bluetooth LED Laser Pointer button Laser pointer Bluetooth indication re-pair button Laser Pointer hole LED Display : Bluetooth LED : Blue LED flashing quickly when turn on the power, the LED flashing slowly after connected.
- Page 2 1. Use Phone Jack cable to connect ABT-220and VCM AUX Phone Jack socket. 2. Connect VVM-230 Vocal Vibration Microphone to ABT-210. 1. Turn on ABT-210 and ABT-220, Bluetooth LED will flashing quickly. 2. The product is default paired. They will automatically making the connection after turn on the power.
- Page 3 According to FCC Part 15.21 Information to user. Caution: The user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Need help?
Do you have a question about the ABT-210 and is the answer not in the manual?
Questions and answers