1. Manuals
  2. Brands
  3. Evertek Manuals
  4. Security Camera
  5. CM380CWAS
  6. User manual

Evertek CM380CWAS User Manual

Wireless camera
Hide thumbs
1
2
3
4

Advertisement

Table of Contents

Thank you for choosing this product. Please read this manual carefully before you use it. And it will benefit you
to use this product better.

I. Introduction

CM380CWAS wireless camera uses ISM wave band which can transfer audio and video signal in the frequency
scope of 2400～2483MHz, it can be used in baby monitoring, patient custody, security, surveillance, etc.
Ⅱ Specification
.
Power voltage:
Video Frequency：
Horizontal Moving Degree：
Vertical Moving Degree：
Image Device：
Horizontal Definition:
Receiving Sensitivity:
Size:
Weight:
CM380CWAS Wireless Camera User Manual
12V/1A
2.414GHz, 2.432GHz, 2.450GHz, 2.468GHz
300 degree
70 degree
SONY 1/4 CCD，
420 TV lines
-90DBm
118x135x135mm
0.32kg
Page 1 of 4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CM380CWAS and is the answer not in the manual?

Questions and answers

Summary of Contents for Evertek CM380CWAS

  • Page 1 I. Introduction CM380CWAS wireless camera uses ISM wave band which can transfer audio and video signal in the frequency scope of 2400～2483MHz, it can be used in baby monitoring, patient custody, security, surveillance, etc. Ⅱ Specification...
  • Page 2 III. The entire sketch map Infrared Light This is not used at this moment 2.4G Antenna Power light Power jack Power switch Channel choosing Page 2 of 4...
  • Page 3 IV. Operation illustration 1. This product is 2.4GHz wireless camera, it is wireless remote which can move atomically, move horizontally and vertically, and let you use it more easily. 2. This product should be used with the RC822A. 3. Please use the right power adapter; you should tighten the antenna before connecting the power. When it connects to the power, the red indicator light will be bright.
  • Page 4 Attention: ONLY MANUFACTURER CAN INSTALL ANTENNA INTO SMA ANTENNA PORT OF THIS DEVICE PERMANENTLY WHEN PRODUCTION. THE USER CANNOT REMOVE FIXED ANTENNA FROM THE DEVICE BECAUSE OF WELDING ANTENNA ON PORT. THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFACE CAUSED BY UNAUTHORIZED INSTALLATION OF ANTENNA INTO THIS EQUIPMENT.

Table of Contents