Advertisement
Quick Links
C20
STAINLESS STEEL TOOL HOLDER TROLLEYS
FITTING THE TROLLEYS.
1
Place the shelf on the ground and bring the handle
closer with the wheels.
Tighten with the screws TE 8x30, nut and washer,
loosely.
Position the lower tray in the same way, as well as
2
the central tray if present.
installation instructions
Via Bonazzi, 4 - 40013 Castel Maggiore (BO)
Tel. +39 051 700096 (10 linee) - Fax +39 051 700175
info@tecnotelai.it - www.tecnotelai.it
Made of austenitic stainless steel
first grade AISI 304 (EN 1.4301)
with moulded tray shelves.
0 tube frame 25mm with 4
shank swivel wheels 0 mm.
125 in dark grey thermoplastic
rubber and nucleus in light grey
polymer.
Capacity 80 kg.
Suitable for the food,
pharmaceutical and chemical
sectors.
! /! 1 2
Advertisement
Summary of Contents for tecnotelai C200
- Page 1 Position the lower tray in the same way, as well as the central tray if present. Via Bonazzi, 4 - 40013 Castel Maggiore (BO) ! /! 1 2 Tel. +39 051 700096 (10 linee) - Fax +39 051 700175 info@tecnotelai.it - www.tecnotelai.it...
- Page 2 * Before each use check that the wheels are not blocked by dust or otherwise. If it is the case, thoroughly clean, removing the impurities. Via Bonazzi, 4 - 40013 Castel Maggiore (BO) ! /! 2 2 Tel. +39 051 700096 (10 linee) - Fax +39 051 700175 info@tecnotelai.it - www.tecnotelai.it...
Need help?
Do you have a question about the C200 and is the answer not in the manual?
Questions and answers