JABSCO 30510-0 Series Manual

SELF-PRIMING PUMPS
FEATURES
Pump Type: Pedestal Pump
Body: 316 Stainless Steel
Impeller: Neoprene, Nitrile, Viton* or EPDM
Shaft Seal: Mechanical; Carbon-on-Ceramic,
or Tungsten Carbide; Nitrile or
Viton
Ports: 3/4" NPT Internal
Shaft: 316 Stainless Steel
Weight: 5.5 lb (2,5 kg) Approx.
VARIATIONS AVAILABLE
MODEL NO. DESCRIPTION
30510-0001 Standard Pressure, Neoprene
Impeller, Carbon Seal
30510-0003 Standard Pressure, Nitrile Impeller,
Carbon Seal
30510-0004 Standard Pressure, Viton Impeller,
Carbon Seal
30510-0011 High Pressure, Neoprene Impeller,
Carbon Seal
30510-0013 High Pressure, Nitrile Impeller,
Carbon Seal
30510-0014 High Pressure, Viton Impeller,
Carbon Seal
30510-0101 Standard Pressure, Neoprene
Impeller, Tungsten Carbide Seal
30510-0103 Standard Pressure, Nitrile Impeller,
Tungsten Carbide Seal
30510-0104 Standard Pressure, Viton Impeller,
Tungsten Carbide Seal
30510-0111 High Pressure, Neoprene Impeller,
Tungsten Carbide Seal
30510-0113 High Pressure, Nitrile Impeller,
Tungsten Carbide Seal
30510-0114 High Pressure, Viton Impeller,
Tungsten Carbide Seal
APPLICATIONS
INDUSTRIAL: Circulating and transferring, velocity-mix-
ing, pumping machine tool coolants, spill return, sump
drainage, chemicals, pharmaceuticals, soap, liquors,
ink, dyes, alcohol, dilute acids, tanning liquors, glycer-
ine, brine, etc.
PHARMACEUTICAL: Processing medicines, lotions and
preparations. Filtering pharmaceutical solutions. Filling
line supply pump.
Viton * is a trademark of E.I. Du Pont de Nemours and Company.
Models 30510-0XXX
PAPER PROCESSING: Transferring and applying
starches, sizes, etc. Circulating and processing wood
pulp slurries.
FOOD, BEVERAGE & DAIRY: Transfer brines, vinegar,
syrups during processing, liquids containing solids in
suspension such as chopped tomatoes, nuts, etc.
Removal of distillery wort and brewery slop. Processing
viscous materials such as peanut butter, mayonnaise,
ketchup, honey, etc. (low speed). Pumping whiskey,
wine, rums, juices and ciders.
AGRICULTURAL: Transferring liquid fertilizers, herbi-
cides and pesticides.
OPERATING INSTRUCTIONS
1. INSTALLATION – Pump may be mounted in any
position. The rotation of the pump shaft determines
the location of the pump's intake and discharge
ports (refer to dimensional drawing). Pump is nor-
mally assembled at factory for clockwise rotation
(looking at end cover). If counter clockwise rotation
is desired, follow steps 1 and 2 of disassembly and
step 9 of assembly instructions to change direction
of impeller blade deflection under cam.
2. DRIVE – Belt or direct with flexible coupling.
Belt Drive: Overtight belt load will reduce pump
bearing life.
Direct Drive: Clearance should be left between drive
shaft and pump shaft when installing coupling.
Always mount and align pump and drive shaft before
tightening the coupling set screw. If pulley or cou-