Advertisement
Quick Links
SELF-PRIMING PUMPS
FEATURES
Pedestal Pump
Pump Type:
Epoxy Plastic
Body:
Neoprene, Nitrile, Viton* or EPDM
Impeller:
Mechanical, Carbon-on-Ceramic,
Shaft Seal:
or Tungsten Carbide; Nitrile or
Viton
3/4" NPT External
Ports:
Epoxy Plastic Covered Stainless
Shaft:
Steel
4.5 lb (2.0 kg) Approx.
Weight:
VARIATIONS AVAILABLE
MODEL NO.
DESCRIPTION
Standard Pressure, Neoprene
30510-1001
Impeller, Carbon Seal
Standard Pressure, Nitrile Impeller,
30510-1003
Carbon Seal
Standard Pressure, Viton Impeller,
30510-1004
Carbon Seal
High Pressure, Neoprene Im pel ler,
30510-1011
Carbon Seal
High Pressure, Nitrile Impeller,
30510-1013
Carbon Seal
High Pressure, Viton Impeller,
30510-1014
Carbon Seal
Standard Pressure, Neoprene
30510-1101
Impeller, Tungsten Carbide Seal
Standard Pressure, Nitrile Impeller,
30510-1103
Tungsten Carbide Seal
Standard Pressure, Viton Impeller,
30510-1104
Tungsten Carbide Seal
High Pressure, Neoprene Impeller,
30510-1111
Tungsten Carbide Seal
High Pressure, Nitrile Impeller,
30510-1113
Viton * is a trademark of E.I. Du Pont de Nemours and Company.
MODELS 30510-1XXX
Tungsten Carbide Seal
High Pressure, Viton Impeller,
30510-1114
Tungsten Carbide Seal
APPLICATIONS
INDUSTRIAL: Circulating and transferring corrosive
liquids. Re turn ing spilled liquids to process, transferring
Explosion hazard. Do not pump gasoline,
WARNING
!
solvents, thinners or other flammable liquids.
To do so can cause an explosion resulting in
injury or death.
foaming solutions with entrained air, such as soaps and
detergents. Sampling and pilot plant installations.
Handles pure solutions, acids, alkalies, photo chemi cals,
dyes, detergents, waxes, gels, solutions with suspended
solids and emulsions.
METAL PLATING: Filtration of plating solutions. Filling
and emptying vats. Adding chemicals for pH balance.
PHARMACEUTICAL: Processing lab solutions, medi-
cines, lotions and preparations. Filtering pharmaceutical
solutions.
AGRICULTURAL: Transferring liquid fertilizers, herbi-
cides and pesticides.
OPERATING INSTRUCTIONS
1. INSTALLATION – Pump may be mounted in any
position. The rotation of the pump shaft determines
the location of the pump's intake and discharge
ports. (Refer to dimensional drawing.) Pump is nor-
mally assembled at factory for clockwise rotation
(looking at end cover). If counter clockwise rotation
Advertisement
Related Manuals for JABSCO 30510-1003
Summary of Contents for JABSCO 30510-1003
-
Page 1: Operating Instructions
Explosion hazard. Do not pump gasoline, WARNING solvents, thinners or other flammable liquids. Standard Pressure, Nitrile Impeller, To do so can cause an explosion resulting in 30510-1003 injury or death. Carbon Seal Standard Pressure, Viton Impeller, foaming solutions with entrained air, such as soaps and 30510-1004 detergents. - Page 2 Apply a Industrial Pump Catalog (available upon request steady pressure to the shaft until bearing locates from ITT Jabsco) or factory for proper body materi- against shoulder on shaft. Repeat for second bearing. als and impeller compounds. If corrosive fluids are handled, pump life will be prolonged if pump is 2.
-
Page 3: Parts List
PARTS LIST Description Qty. Req. Part Number Bearing Housing 18753-0183 Body 18753-0188 End Cover 18753-0194 Shaft 18753-0204 Impeller: Standard Pressure – Neoprene 14281-0001 Standard Pressure – Nitrile 14281-0003 Standard Pressure – Viton 14281-0004 Standard Pressure – EPDM 7614-0002 High Pressure – Neoprene 8980-0005 High Pressure –... -
Page 4: Performance Curves
Jabsco Italia, s.r.l., Via Tommaseo, 6, 20059 Vimercate, Milano ITALY Tel: +39 039 685 2323 Fax: +39 039 666 307 Jabsco is a trademark of Xylem Inc. or one of its subsidiaries. © 2012 Xylem, Inc. 43000-0516 Rev B 10/2012...