Summary of Contents for S&T TPMS1209T03-CS
- Page 1 TPMS1209T03-CS Hand Tool User Manual S&T TPMS1209T03-CS Hand Tool User Manual Suzhou Sate Auto Electronic Co., Ltd www.sate.com.cn...
-
Page 2: Fcc Warning
TPMS1209T03-CS Hand Tool User Manual Table of Contents S&T TPMS1209T03-CS Hand Tool Components------------------------3 S&T TPMS1209T03-CS Hand Tool Functions----------------------------4 S&T TPMS1209T03-CS Hand Tool Operations---------------------------4 FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:... - Page 3 已匹配好的传感器信息， 更换拖车时很轻松的实现中央监控器与传感器的重新匹配， 以满足 拖挂型卡车频繁更换拖车的需要。 S&T TPMS1209T03-CS has the Smart Booster, which can avoid the inconvenience. Input the trailer number into the Hand Tool and program the transmitter ID, pressure unit and standard pressure, and then send the information to the Smart Booster. The Smart Booster saves the transmitters’...
- Page 4 TPMS1209T03-CS Hand Tool User Manual 驶安特 TPMS1209T03-CS 手持工具的操作 S&T TPMS1209T03-CS Hand Tool Operations 1.打开手持工具电源开关，出现欢迎界面： 1. Turn on the switch to enter the welcome interface: Sate Auto Electronic Co. , Ltd Hand Set Tool 2. 此时按任意键进入功能菜单界面，一共有五个功能菜单选项，分两屏显示。第一屏显 示四个菜单，如图所示： 2. Press any key to enter the main menu interface. 5 options are displayed in two interfaces, four in first interface and one in second interface, see below figure: 〉READ INFORMATION BOOSTER...
- Page 5 TPMS1209T03-CS Hand Tool User Manual 功能菜单说明： Functions: READ INFORMATION TO BOOSTER（阅读中继器信息） ID(中继器 ID 码设置) CHOOSE BOOSTER PRESSURE UNIT SELECT（压力单位设置） ADD SENSOR TO TRAILER（拖车传感器位置设置） SEND INFORMATION TO BOOSTER(发送信息给中继器) 阅读中继器信息 READ INFORMATION TO BOOSTER 将“>”移动到“READ INFORMATION FORM 1.在功能菜单显示界面下，按方向键 BOOSTER” 选项， 然后将手持工具靠近智能中继器，按下“Enter 键”就可以读取智能中...
- Page 6 TPMS1209T03-CS Hand Tool User Manual 3.阅读成功后，可进入“中继器 ID 码设置”菜单和“拖车传感器位置设置”菜单查看阅读 到的信息。 3. After read successfully, enter the “CHOOSE BOOSTER ID” and “ADD SENSOR TO TRAILER” menu to check the read information. 注意:在阅读中继器信息前，要先在“中继器 ID 码设置”功能菜单下将拖车号设置为“000 000”然后返回到“阅读中继器信息”功能菜单下进行操作才能阅读成功。如果要阅读某一 固定的中继器 ID，可直接输入要阅读的中继器 ID，然后阅读。 Note: Before read information from booster, the user needs to program the trailer number as: 000 000”...
- Page 7 TPMS1209T03-CS Hand Tool User Manual 3.此时按“Enter 键” “BOOSTER ID”的第一个数字“0”开始闪烁，按数字键输入需要的 “BOOSTER ID”号，当输入一位数字后闪烁的数字位置自动跳到下一位。按 或 键可 移动要更改的数字位置。 3. Press “ENTER” button, the first digit of “BOOSTER ID” flashes, press number key to input the required “BOOSTER ID”, the second digit flashes after finished the first digit programming.
- Page 8 TPMS1209T03-CS Hand Tool User Manual to remove the “>”to the “PRESSURE UNIT 1. Under the main menu interface, press SELECT”option. READ INFORMATION TO BOOSTER CHOOSE BOOSTER ID 〉PRESSURE UNIT SELECT ADD SENSOR TO TRAILER 2.按下“Enter 键”进入手持设备压力单位设置界面。屏幕显示如下： 2. Press “ENTER” button to enter the “PRESSURE UNIT SELECT”interface. The screen...
- Page 9 TPMS1209T03-CS Hand Tool User Manual 拖车传感器位置设置 ADD SENSOR TO TRAILER 用户可根据需要来设定传感器位置与轮胎标准压力。 User can program transmitter position and standard pressure according to the demand. 1． 在功能菜单显示界面下， 按方向键 将 “>” 移动到 ADD SENSOR TO BOOSTER 选项， 按下“Enter 键”进入 ADD SENSOR TO BOOSTER 界面。如图所示：...
- Page 10 TPMS1209T03-CS Hand Tool User Manual 发送信息给中继器 1.当设定好 BOOSTER ID 和传感器 ID 码后， 按 或 键选择到 “SEND INFORMATION TO BOOSTER” ，然后将手持工具靠近智能中继器，按“Enter 键”进入发送。此时显示 “SENINING . . .” ，表示正在向智能中继器发送信息。 1. When finished programming the BOOSTER ID and transmitter ID, press to select “SEND INFORMATION TO BOOSTER, then put the Hand Tool close to the Smart Booster, press “ENTER”...
Need help?
Do you have a question about the TPMS1209T03-CS and is the answer not in the manual?
Questions and answers