Summary of Contents for DAVIS WeatherLink Live
- Page 1 USER MANUAL WeatherLink Live Product number 6100 Davis Instruments, 3465 Diablo Avenue, Hayward, CA 94545-2778 U.S.A. • 510-732-9229 • www.davisinstruments.com...
- Page 2 (2) l'appareil doit accepter tout brouillage radioelectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Changes or modification not expressly approved in writing by Davis Instruments may void the warranty and void the user's authority to operate this equipment.
-
Page 3: Install The Weatherlink App And Create Your Account
Welcome to WeatherLink Live WeatherLink Live enables you to live-stream your weather station data to the WeatherLink app while on your Wi-Fi, and to automatically upload your data to the WeatherLink Cloud via Wi-Fi or Ethernet. While on Wi-Fi, your WeatherLink app will receive update packets every 2.5 seconds;... -
Page 4: Power Up And Connect Your Weatherlink Live
Channels Note: WeatherLink Live is powered by AC power with battery backup. AC power is required; it cannot be set up or run on batteries alone. It is highly recommended that you install batteries to prevent loss of data if AC power is lost. -
Page 5: Set Up Your Weatherlink Live
Set Up Your WeatherLink Live 6. When you are prompted to do so, enter a name for your WeatherLink Live, such as “Downtown Hayward Weather.” Remember that this name will be visible to all WeatherLink users if you make your station “public.” (The Device ID and activation date will be entered automatically.) -
Page 6: Set Up The Transmitting Station(S)
10. In the next screen, tap the ID of the transmitting station. (This will probably be ID 1, because Davis transmitters are set at the factory to transmit on ID 1.) 11. In the next screens, you will specify the type of transmitter: Vantage Vue sensor suite, Vantage Pro2 sensor suite (choose this one if you have a Vantage Pro2 Plus sensor suite), Sensor Transmitter, or Leaf/Soil/Temp Station. -
Page 7: Troubleshooting
In the WeatherLink app tap the Account icon at the top of the home screen. Scroll down to your WeatherLink Live’s name, and tap the > next to it. Tap Configure Stations. Tap Edit next to your WeatherLink Live’s name. Tap Archive Rate, and choose 30, 60 or 120 minutes. -
Page 8: Contacting Davis Technical Support
Davis Instruments Corp., Hayward, CA. © Davis Instruments Corp. 2019. All rights reserved. Information in this document subject to change without notice. Davis Instruments Quality Management System is ISO 9001 certified. ® 3465 Diablo Avenue, Hayward, CA 94545-2778 U.S.A.
Need help?
Do you have a question about the WeatherLink Live and is the answer not in the manual?
Questions and answers