Page 2
Dear customer! First of all thank you very much, that you have decided for the cmx® CRC 7210! Please read all information’s carefully before you start running the cmx® CRC 7210. Our company reserves the right to improve the product. That changes to specifications and design, also without notice.
AC plug must match the slot in receptacle “wall socket”. Invisible laser radiation when open and interlocks defeated. Avoid exposure to beam. CLASS 1 LASER PRODUCT Version 2 cmx® CRC 7210 Side 4 from 14...
4. CD “STOP“ (AM / FM / OFF / CD) 5. CD 12. Volume control “REPEAT/PROGRAM” 13. Radio dial scale 6. “SKIP+10/FOLDER” window 7. CD “BACK” 14. Handle 8. CD “NEXT“ Version 2 cmx® CRC 7210 Side 5 from 14...
When the plug of a headphone is inserted into this jack, the built-in speakers will automatically be disabled. When the headphone is disconnected, the speakers will be re- activated. Version 2 cmx® CRC 7210 Side 7 from 14...
(track). At anytime during playback, press “PLAY/PAUSE” to stop the operation of the unit. Press “PLAY/PAUSE” to resume the operation at the same track and position. Version 2 cmx® CRC 7210 Side 8 from 14...
The display will alternate between the song number & the folder number every 5 seconds. NOTE The “folder” function only works on MP3-discs which have folders. your disc folders, pressing Version 2 cmx® CRC 7210 Side 9 from 14...
Repeat the previous 2 Steps, each time selecting any track number of your choice to be stored in the successive memory (program) positions. After each track number, remember press “REPEAT/PROGRAM” key. Version 2 cmx® CRC 7210 Side 10 from 14...
Page 11
To clear (cancel) the entire program which is stored in the memory, simply press “STOP”, or switch off the set. Version 2 cmx® CRC 7210 Side 11 from 14...
AM (MW) radio reception: rotate or re-position the main unit Rotate tuning knob to tune-in the desired station, as displayed in the LCD digital display. Adjust the volume to desired level. Version 2 cmx® CRC 7210 Side 12 from 14...
The mains plug should not be obstructed or should be easily accessed during intended use. Under the influence of electrostatic phenomenon, the product may malfunction and user to power reset. Version 2 cmx® CRC 7210 Side 13 from 14...
Page 14
In such a case, please reset the unit (by disconnecting and reconnecting AC power source) to revert the unit to normal operation. CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Version 2 cmx® CRC 7210 Side 14 from 14...
Need help?
Do you have a question about the CRC7210 and is the answer not in the manual?
Questions and answers