Page 1
Oricore st-66 Oricore st-66 Bluetooth Headsets gives you more freedom on the move. Pair with compatible Bluetooth mobile phones and this headset makes it easier for you to carry on with your tasks whilst making or taking a call. Oricore ST-66 Bluetooth Headset is compliant with Bluetooth Version 2.0...
Contents Oricore ST-66 Bluetooth headset overview………………………………………………………….………………….….1 Display information…………………………………………………………………………………………………...…….…2 Getting Started……………………………………………………………………………………………………….…….….3 Charging Your headset…………………………………………………………………………………………………..…..3 Normal Charging Time……………………………………………………………………………………….….3 Talk and Standby Time…………………………………………………………………………………………...3 Turning Your Headset On and Off…………………………………………………………………………………………4 Pairing Your Headset…………………………………………………………………………………………………..….4-5 Use Your Headset………………………………………………………………………………………………………..…5-6 Answer a Call………………………………………………………………………………………………..…..5 Talk and Standby Time……………………………………………………………………………………..……5 Adjusting the Volume……………………………………………………………………………………….……5 Dialing from Your Mobile phone………………………………………………………………………….……6...
Display Information Battery Icon(Full Capacity) Battery Icon(Half Capacity) Battery Icon(Empty/Low Battery) PAIRING Pairing status, press and hold MFB for 5-6 seconds CONNECTED The pairing is completed Power on Turn on Connecting When turning on the headset will connect with last device which you have matched before.
Getting Started To use your Oricore ST-66 Bluetooth Headset,please follow the steps below: Ensure your headset is fully charged Pair your charged headset with a Bluetooth-enabled mobile phone Charging Your Headset The headset comes with a built-in rechargeable battery. Prior to using the headset for the first time, it is recommended to fully charge the battery first.
1)for 5~6 seconds until you hear a short beep. The display will prompt”ST-66 pairing”. IMPORTANT: Press the MFB again when you want to turn on the headset to headset to re-activate pairing and ensure the connection between the headset and the mobile phone is resumed. For pairing, please refer to “Pairing Your Headset”.
Set the mobile phone to search for Bluetooth devices within the one metre range,as instructed in the mobile phone user guide,and select ST-66”from the list. Enter the pre-programmed passkey”0000” and press “ok” to pair your headset and mobile phone.When the pairing is completed,the headset’s display will show “connected”...
Using Your Headset Dialing from Your Headset Simply make calls on your mobile phone in the normal way. Press MFB to cancel this call. Voice Dialing form Your Headset If you mobile phone is equipped with the voice dialing function, simply press the MFB on your headset, and when you hear a beep say the voice tag.
Care and Maintenance Headset ·Consider turning your headset off before placing it in your pocket or bag. If the MFB is accidentally activated, your mobile phone may place an unintended call. ·Do not expose the headset to liquid, moisture or humidity as it is not waterproof. ·Do not use abrasive cleaning solvents to clean the headset.
Built-in Battery ·Do not attempt to replace the headset’s battery yourself as it is built into the headset and is non-changeable. ·Charge the battery in accordance with the instructions supplied with this user guide. Charging ·Only use the manufacturer supplied charger when charging the headset. ·Do not disassemble the charger as it may expose you to dangerous voltages and other risks.
Safety Information ·Check local laws regarding the use of mobile phones and headsets while driving. If you use the headset while driving, ensure your attention and focus remains on the road and you drive in a responsible and safe manner. ·Never allow children to play with the headset –small parts may be a choking hazard.
If the above steps do not solve your problem, please recharge the headset And remove your mobile phone battery for a short time. Compatibility Works with all Bluetooth-enabled phones version 2.0 To know more our products information, please visit our website: http://www.oricore.com...
Product specifications Version: headset,handsfree ,A2DP and AVRCP Bluetooth profile supported: Range of frequency: 2.4ghz spectrum 51*23*23 Dimension: Nominal charging time: within 3 hours Talk time: up to 10 hours Stand-by time: up to 180hours Weight: 17.5 grams...
Need help?
Do you have a question about the ST-66 and is the answer not in the manual?
Questions and answers