Subscribe to Our Youtube Channel
Related Manuals for Scott SZ 55
Summary of Contents for Scott SZ 55
- Page 1 sx 55 STEREO RADIO CASSETTE PLAYER WITH CD/MP3 PLAYER AND USB PORT Instruction Manual...
- Page 2 WARNING CLASS 1 LASER PRODUCT CAUTION CLASS 1 LASER PRODUCT INVISIBLE LASER RADIATION APPAREIL Á LASER DE CLASSE 1 WHEN OPEN AND INTERLOCKS PRODUCTO LASER DE CLASE 1 DEFEATED. AVOID EXPOSURE TO BEAM This product contains a low power laser device. Warning: Do not touch the lens.
-
Page 3: Cassette Player Operation
TABLE OF CONTENTS WARNING…...…………………………………………………………………….. SAFETY PRECAUTIONS………………………………………………………… 1 TABLE OF CONTENTS………………………………………………………….. BOX CONTENTS……..…………………………………………………………… 2 LOCATION OF CONTROLS……………………………………………………... 2 POWER SUPPLY….……………………………………………………………… BASIC OPERATION..…………………………………………………………….. RADIO OPERATION……………………………………………………………… CD / MP3 / WMA PLAYER OPERATION……………………………….………. 4 USB DEVICE OPERATION……..……………………………………………….. AUX IN FUNCTION ………….…………………………………………………… CASSETTE PLAYER OPERATION ……………………………………………. MAINTENANCE……………………………………………………………………... - Page 4 LCD DISPLAY 1. Tuner FM/AM mode 2. Digit and text display 3. MHz/kHz: Unit of FM/AM radio frequency 4. Play a CD/ read a USB device 5. USB mode 6. Random 7. Repeat folder 8. AUX IN mode 9. Cassette TAPE mode 10. CD playback 13. WMA file 11. REPEAT 1/ALL 14. Programmed play 12. MP3 file 15. PM: 12 hour display mode POWER SUPPLY Using the AC power supply Insert the AC power cord into an AC mains outlet with a 230V AC ~ 50Hz power source and insert the other end into the AC ~ socket at the back of the unit.
- Page 5 RADIO OPERATION Listening to the radio 1. When the unit is switched on, press the FUNCTION button to select TUNER mode. 2. In tuner mode, press the BAND button to select FM or AM. 3. Turn the TUNING dial to receive a station. The radio frequency is indicated on the LCD display. FM Stereo mode In FM mode, the FM ST LED indicator lights up when the unit receives a station with a strong signal and stereo sound...
- Page 6 Programmed playback You can program up to 20 tracks. 1. In STOP mode, press the PROG button and the track number “P01” will flash. 2. Press the buttons to select the track number. 3. Press the PROG button to confirm. 4. Repeat steps 2 and 3 above to program other tracks. 5. To play the program, press the button. 6. To clear the program, press the button twice or open/close the CD compartment or go to standby mode. When programming a CD containing MP3 / WMA files, you can press the FOLDER UP button to select the folder in which you want to program the tracks.
- Page 7 To erase a recorded cassette tape 1. Follow steps 1 to 5 in “Cassette tape playback” to play the cassette tape. 2. Press the RECORD and PLAY buttons together to start erasing. 3. To stop erasing, press the STOP/EJECT button. Cleaning the tape heads To maintain optimum sound quality, clean the pinch roller (a), capstan (b), playback/record heads (c) and erasure head (d) regularly (every 10 hours of use). Use a cotton swab lightly moistened with cleaning fluid or denatured alcohol. MAINTENANCE Care and maintenance To clean the unit, unplug it and wipe off dust and stains with a soft cloth moistened with a mild soap and water solution only. Do not use benzene, thinner or similar chemicals to clean the unit. Cleaning CD discs If the music skips or does not play, the disc may need cleaning. Before playback, wipe the disc from the center out with a clean cloth.
- Page 8 TECHNICAL SPECIFICATIONS CD/ USB Compatible discs and files CD, CD-R/RW, CD-DA, MP3 and WMA USB port type USB maximum handling capacity Radio Tuning range FM: 88 – 108 MHz AM: 531 – 1620 kHz Antennas FM: telescopic antenna AM: built-in ferrite bar Cassette Recording system AC bias Erasing system Magnetic erase Tape speed 4.75 cm / sec. General Output power (RMS) 2 x 1.2 W (AC power) 2 X 1 W (battery power supply) Power consumption Speakers 3”...
Need help?
Do you have a question about the SZ 55 and is the answer not in the manual?
Questions and answers