Usb Device Operation - Scott SX 50 Instruction Manual

REPEAT/RANDOM playback
During playback, press the PROG button repeatedly to select the playback mode according to
the following table:
File
CD
MP3/WMA files
PROGRAM playback
You can program up to 20 tracks for CDs and 99 tracks for
MP3/WMA files.
1. In STOP mode, press the PROG button and the track number "P01" will flash.
2. Press the /
3. Press the PROG button to confirm.
4. Repeat above steps 2 and 3 to program the other tracks.
5. To play the program, press
6. To clear the program, press the
to standby mode.
When programming a CD containing MP3/ WMA files, you can press
the button to select the folder in which you want to program the
tracks.
Insert a USB device into the USB port at the back of the unit. When
the unit is switched on, press the MODE button repeatedly to select
the source – CD. If both a CD and a USB device are inserted, press
the CD/USB button to select USB. Refer to "CD/ MP3 / WMA OPERATION" to play MP3/ WMA
files.
Note: Due to technical differences, some models of USB storage devices or MP3 players may
take longer to be read. In some cases, they may not even be read.
Repeat One (
Repeat One (
Random (
)
button to select the track number.
button.
button twice or open/close the CD compartment door or go

USB DEVICE OPERATION

Playback mode
), Repeat All ( ), Random (
), Repeat Folder (
GB-6
)
), Repeat All (
),