Table of Contents
Advertisement
AUDIO CONTROL
1.
Press the standby button to switch the power on/off.
2.
Press the STOP / CLEAR / CD / USB button repeatedly to
select CD or
CLOCK ADJUSTMENT
The clock is displayed on the LCD display in standby mode.
1. Press the PROGRAM / CLOCK-ADJ. button,
2. Press the
or
3. Press the PROGRAM / CLOCK-ADJ. button, The hour digit will flash.
4. Press the or button to adjust the hour digit.
5. Press the PROGRAM / CLOCK-ADJ. button again, The minute digit will flash.
6. Press the or button to adjust the minute digit.
7. Press the PROGRAM / CLOCK-ADJ. button again, The correct time is shown on the display.
LISTENING TO THE RADIO
1 .
Press the STANDBY
2 .
Set the function switch to RADIO.
FUNCTION
RADIO
3 .
Select the FM ST. (FM stereo) or FM MONO mode.
MODE
FM ST.
FM MONO
Extend the antenna and adjust the angle to get a better reception.
FM
NOTE : 1. The FM stereo LED indicator lights if the unit receives an FM stereo broadcast and the MODE switch
is set to "FM STEREO".
2. When too much noise is heard during FM STEREO reception, set the MODE switch to FM MONO.
AFTER LISTENING
Press the STANDBY
USB mode.
button to select 12 hour or 24 hour display.
button to turn on the unit.
button to switch the unit off.
PROGRAM/CLOCK-ADJ.
4 . Tune to the desired radio station by using the TUNING
knob. The frequency is displayed.
TUNING
5 . Adjust the volume level using the VOLUME button.
GB 2
STOP / CLEAR /
CD/USB
LCD display
VOLUME
MIN.
MAX.
Advertisement
Table of Contents
