ENERGY SISTEM Energy TDT HD 3 User Manual
  1. Manuals
  2. Brands
  3. ENERGY SISTEM Manuals
  4. Receiver
  5. Energy TDT HD 3
  6. User manual
ENERGY SISTEM Energy TDT HD 3 User Manual

ENERGY SISTEM Energy TDT HD 3 User Manual

Dvb-t receiver
Hide thumbs
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Energy TDT HD 3 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ENERGY SISTEM Energy TDT HD 3

Summary of Contents for ENERGY SISTEM Energy TDT HD 3

  • Page 2 User manual...

  • Page 4: Important Safety Instructions

    1. INTRODUCTION Thank you for purchasing this Energy TDT HD 3 . First of all, welcome to the Energy HD DVB-T receivers world. The following sections provide an overview of your new device and its basics features. Please read everything carefully before start using the product.

  • Page 5: Battery Disposal

    2.2. VeNTIlaTION The slots and openings on the set top box are for ventilation. Do not cover or block them as it may cause overheating. NEVER let children push anything into the holes or slots on the case. 2.3. SeRVICINg There are no user serviceable parts in this DVB-T receiver.

  • Page 6: General View

    3. geNeRal VIeW 3.1. fRONT paNel STANDBY INDICATOR: Used to visually show power state of the set top box, the green LED will be light if turned on the set top box and the red LED will be light if the set top box entered standby mode.

  • Page 7: Rear Panel

    3.3. ReaR paNel RF IN: This socket connects to your external aerial. COAXIAL: This output connects to a coaxial socket on your surround sound system. HDMI OUT: This output connects to a HDMI in device. SCART OUT: This output connects to your TV. DC IN 5V: Used to connect the 5V DC adapter.

  • Page 8: Remote Control

    4. RemOTe CONTROl 4.1. BUTTON DeSCRIpTIONS MUTE: Mute or restore audio output. INFO: Displays additional channel information. TTX: Displays Teletext information. STANDBY MUTE LIST SUBTITLE: Selects subtitles language. EXIT: Exits the current menu or returns to the previous menu. INFO OK: Confirms an entry or selection.

  • Page 9: Installing The Batteries

    4.2. INSTallINg THe BaTTeRIeS Remove the battery cover from the remote control and put 2xAAA size batteries inside the compartment. The following diagram shows the correct way to insert batteries. Open the cover Install batteries Close the cover ≥ Keep batteries out of reach of children. If someone swallows a coin cell or battery must receive immediate medical attention.
  • Page 10 5. CONNeCTIONS Caution: Make sure to check the voltage specification of the wall outlet is the same rating with the receiver. To prevent the risk of electric shock, do not open the cover or the back of the receiver. TV Aereal ANT IN CV BS HDMI...

  • Page 11: First Time Installation

    5.1. CONNeCTINg TDT HD 3 TO a TV 5.2. CONNeCTINg TDT HD 3 TO aUXIlIaRy DeVICeS RF IN COAXIAL HDMI OUT SCART OUT Adapter COAXIAL CABLE COAXIAL AMPLIFICADOR DIGITAL Note: When connecting the receiver to other equipment (e.g. TV, VCR and amplifier), make sure to refer to relevant user manual for instruction.

  • Page 12: Basic Operation

    7. BaSIC OpeRaTION Press the MENU button to acces the menu. It has seven categories. 7.1. INSTallaTION To access the Menu, press the MENU button and select Installation. The Menu provides options to adjust the channel search. Select an option and press OK to adjust that setting.

  • Page 13: Tv Channel Editor

    7.2. CHaNNel 7.2.1. TV CHaNNel eDITOR Press the OK button to access this menu. The menu provides options to adjust the channel and program settings. Here you can edit your program preferences (like lock, skip, move or delete). eDIT: Press edit (red button) to access to a menu where you can rename, move or skip a channel.
  • Page 14 lOCK: You can lock selected programs for restriced view. Select the preferred program then press the green button. A lock shaped symbol is displayed. The program is now marked as locked. Repeat the previous step to select more programs, and press the green button to disable the locked program.

  • Page 15: Time Settings

    7.3. TIme SeTTINgS To access the menu, press Menu then select Time . This menu provides options to adjust the time settings. Press up/down to select an option and press right/left to adjust the setting. Auto time zone: Select auto (ON) or manual (OFF) for time adjustements.

  • Page 16: Video Output

    7.4.2. TV mODe If the video does not appear correctly, you need to change the settings. This should match the most common setting for TVs in your country. [NTSC]: for NTSC system TV. [PAL]: for PAL system TV. 7.4.3. VIDeO OUTpUT You must set the video output to either HDMI, SCART (CVBS), o SCART (RGB).
  • Page 17 7.4.5. OSD TRaNSpaReNCy Adjust OSD transparency to 1-8. It will be applied to all OSD menus. 7.4.6. BaNNeR DISplay TIme The banner with the channel information is displayed when switching from one channel to another. Adjust banner display time (seconds) from 1 second to 'always'.

  • Page 18: Parental Control

    7.5.1. OSD laNgUage Select an OSD language. 7.5.2. aUDIO laNgUage Select the preferred audio language for watching TV channels. If the language is not available, the default program language will be used. 7.5.3. SUBTITle laNgUage Select the preferred subtitle language. Note: Subtitles are available according to the broadcaster's schedule.

  • Page 19: Factory Setting

    7.6.3. faCTORy SeTTINg Reset your HD3 to the Default Factory Settings. Press OK to select, enter your password or the default password '000000' and press OK to confirm. This option will delete all preset channels and settings. 7.6.4. CaleNDaR Press OK to access to a calendar. Click the buttons of up/down change the month and press the right/left to set the year Click EXIT to exit the menu.
  • Page 20 7.7. USB To access the Menu, press the MENU button and select USB using the right/left keys. The menu provides options to playback Music, Photo, Video and Multimedia files. The unit will support USB devices with FAT32 and NTFS file system. 7.7.1.
  • Page 21 7.7.2. ReCORDeR SeTTINg The menu provides options to configure record and timeshift options. Remember that an exter- nal device must be connected. If "One button recording" is enabled, HD3 starts recordring when you press the REC button on the remote control, and the recording period is the time selected in "Default recording period";...

  • Page 22: One Button Recording

    8.1. ONe BUTTON ReCORDINg: While watching TV, press REC button to start recording the channel. Press STOP button to exit. While recording, you can press PAUSE key to start to start the timeshift feature to review the program while recording is in progress. Then you can use REV or FWD key to select the recor- ded segment you want to watch or review, while the recording process continues its normal course.

  • Page 23: Troubleshooting

    9. fIRmWaRe UpDaTe To update the firmware of your TDT HD 3 , visit ourdownload section in our website: www. energysistem.com You will find all the files and instructions needed to update successfully your device. 10. TROUBleSHOOTINg If you experience problems with this DVB-T receiver or its installation, in the first instance plea- se read carefully the relevant sections of this User Manual and this Troubleshooting section.

  • Page 24: Technical Specification

    The battery is exhausted Change new battery Remote control unit is Remote control unit is not Adjust the way of holding not workable in the right opposite of the remote control unit and IR receiver or too far from it near from the IR receiver The image stop suddenly The signal is too weak...

  • Page 25: Warranty Procedure

    12. WaRRaNTy Energy Sistem Soyntec S.A. is liable for any lack of conformity which exists at the time the goods were purchased during a period of 36 months. Batteries are exclu- ded from the 36-month warranty, having a warranty period of 12 months.

  • Page 26: Declaration Of Conformity

    NIF: A53107488 We declare under our own exclusive responsibility that the product: Energy Sistem DVB-T Receiver Energy TDT HD 3 Manufacturing country: China Is in compliance with the essential norms and standards of the Directive 2004/108/EC of the European Parliament and of the Council of December 15th 2004.

Table of Contents