Page 1
4. Security rawinternational Once the screen is safely suspended, please tighten the bolts on the bottom left and right of the bracket using a screw driver (DO NOT OVER TIGHTEN) This engages the front plates to the wall mounting plates to ensure the screen cannot be lifted from the wall (fig.
Page 2
1. Mounting wall plate 2. Attaching front plates to the It is important that the front plates are fixed Ensure front plates are situated in a centralised as centrally as possible to the screen. To help position, tighten the screws on the bottom of the plasma screen Remove security screw from bottom of bracket achieve this, there is a 2mm hole off centre of...