Summary of Contents for Charmsori Happy Call MC-6000 Series
Page 1
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. CHARMSORI Electric Telecom Co., Ltd. Page 1 of 9...
1. Product Description Thanks for purchasing Happy Call System. This device is wireless calling system which adopted High-performance CPU(Central Processing Unit) of Pro-Chips Company. Using Wireless Transmitter and Receiver, User can communicate each other without talking by face to pace, so this device is very useful at restaurants. 2.
Page 3
2) Transmitter ** Repeator and Adaper is optional. 3. Operation Instruction 1)Receiver ① MC-6000 Series - When power is on, the receiver conduct self-diagnosis with music is being played and the display blinking in order. - When a table number is input, it appears on the screen and the number goes off after time setup.
② MC-7000 Series - When power is on, the receiver conducts self-diagnosis with music is being played and the display blinking in order. - When a table number is input, it appears on the screen and the number goes off after time setup.
Page 5
3) Repeator (In case of installation) ① The translator, as a wireless one, can be installed by the only power connection without additional electric wire. ② The channel choice of the translator is the same as the channel regulation of the backside receiver(SW1, SW2 and SW3 are turned on always).
Page 6
5. Option set-up 1) Receiver ① SELECT S/W No. 1-4 have their own functions. When options are changed, the power of S/W should be turned on again after 4-5 seconds' off to make the receiver recognize the change. ② SELECT S/W Functions(Receiver) Page 6 of 9...
Page 7
2) Transmitter ① Switches for number choice are from No.1 to No.7, and switches for channel choice are from No.1 to No.5. ② Number Choice Page 7 of 9...
Page 8
6. Check-point when abnormal operation When this product is operated abnormally, please make inquiries at the A/S or consumer consultation office after checking following points. <In case of malfunction in the receiver> 1. Numbers are displayed but sound is not working. Check if sound regulation is setup at minimum and check if the choice switch No.1 of the receiver is turned off.
<In case of malfunction in the Repeator> 1. Power lamp is not working : Poor contact of connection wire or disconnection 2. Transmission and receipt are not available : Check the green/yellow lamps under the translator. 3. Receipt is OK when the green lamp is turned on and off, and transmission is OK when the yellow lamp is turned on and off.