Page 2
Easy Reel™ Spooler by MORryde Installation Instructions 1. Using the wood screws provided, install your Easy Reel™ Spooler in the desired location by screwing into your wood sub-floor through the 4 mounting hole locations (8 mounting hole locations for the REEL56-009H) on your Easy Reel™ Spooler (see Fig. 1 below).
Page 3
2. Insert the socket end of the detachable cord into one of the holes in the center of your Easy Reel™ Spooler and slide the cord to either the right or left side of the inner spool (see Fig. 3 below).
Page 4
4 below). 2. Insert the plug end of the cord into one of the holes in the center of your Easy Reel™ Spooler from the front of the box and slide the cord to either the right or left side of the inner spool (see Fig.
Need help?
Do you have a question about the EASY REEL and is the answer not in the manual?
Questions and answers
Instead of mounting, the easy real spooler on the floor of my compartment can I mount it on the ceiling?