Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Kongskilde KONNECT 1000
- Page 1 KONGSKILDE KONNECT 1000 Instruction manual Edition: 251018...
-
Page 2: Table Of Contents
TRAMLINING........................13 8. Tramlining choice of method................15 8.1 Symmetrical tramlines................15 8.2 Asymmetrical tramlines................15 8.3 Rules for selection of tramline path............16 8.4 Manually stop the tramlining system............17 9.Tables of symmetrical tramlines..............18-19 10.Table of asymmetrical tramlines................20 NOTES...........................21-22 KONNECT 1000 EN 251017... -
Page 3: Generally
KONNECT 1000 for monitoring electronic functions of the drill, including the establishment of tramlines. In order to use the KONNECT 1000 correctly and safely, we recommend that you familiarize yourself with it by studying this instruction manual. The correct use of the KONNECT 1000, along with careful maintenance, lubrication and storage, will help to keep it in good working order. -
Page 4: Technical Data
Do not power wash down the clutches with water. KONNECT 1000 should be kept in a dry place. Therefore do not leave it in the tractor cab for a long period after the sowing season has finished. -
Page 5: Features And Use
FEATURES AND USE 5.KEYBOARD The handling of KONNECT 1000 is possible via keypad with 9 keys. With the “ON/OFF” key the operator terminal is powered on and by pressing the key with 1s duration it is switches off. If no key is pressed one hour and in the same time no velocity is measured, the device switches off automatically. -
Page 6: Monitor Setup
The top row from left: symbol hopper shows us the status of full box of seed (only two states: empty, full), the current speed of the machine and the selected tramlining system. Bottom row from left: sowing shaft rotation, the area sown so far. KONNECT 1000 EN 251017... -
Page 7: Screen Brightness And Contrast
FEATURES AND USE 6.3 SCREEN BRIGHTNESS AND CONTRAST The third press of the “MENU OK” selects the display brightness setting. Display Display Use the arrow keys “up-down” select, by means of a bar chart, the corresponding value of the brightness of the display. Pressing the “MENU OK” approve the selected level. 6.4 ALARM SETTINGS The seed level in the hopper and work couplings pathnames can be monitored by means of audible alarms. -
Page 8: Alarms
Area meter accuracy of the calculation depends on the number of impulses in the system collects during operation of the drill in the field. The following method is to calculate the number of pulses according to the following formula: 3183 pulses = rubber wheel diameter (in cm) KONNECT 1000 EN 251017... -
Page 9: Alarm Time
FEATURES AND USE Choose the speed display of the machine by the “MENU OK” Imp. 100 m Enter the number of impulses from the table below. Saving in memory the number of pulses is necessary for the correct indication of sown area. -
Page 10: Working Width
Then sowing shaft is disconnected in the middle of its length by means of the clutch cen- ter. Thereby half the sowing wheels on the left hand side of the drill from the rear of the machine are not running. KONNECT 1000 EN 251017... -
Page 11: Calibration
To find the right seed rate, you must calibrate the drill. To do this, perform the test as described in the Manual according to your type of drill. We can also use KONNECT 1000 test - the calibration sequence below. However the results obtained from the test should be regarded as indicative. Correct data on the sowing rate can only be obtained by testing using the traditional method. - Page 12 The last 5 turns of the crank are signaled additionally acoustically to prepare “0,0” the operator to end the calibration process. On reaching the value , continuous signal tone is triggered to cause the operator to end the calibration immediately. Calibration Calibration 82,0 START KONNECT 1000 EN 160117...
- Page 13 CALIBRATION Pressing key “MENU OK” we can see on the screen suggested weight of the sample seed material on 1/40 hectare field. The example below. Calibration 3,30 STEP 5 Weighing the sample of sowing material and check value of seed per hectare. The seed material collected in the calibration trays must be weighed.
- Page 14 NS 4100 3m Eco Line 3.0m NS 4100 4m Profi Line 3.0m NS 5100 3.0m Profi Line 4.0m NS 5100 4.0m Profi Line 4.5m NS 5100 5.0m Master Line 3.0m NS 5100 6.0m Master Line 4.0m KONNECT 1000 EN 160117...
-
Page 15: Tramlining
TRAMLINING 8. TRAMLINING CHOICE OF METHOD The choice of methods for creating tramlines is brought to the sequence on the surface of the field so as to create a passage of unsown stripes that will be used in later crop treatments like fertilization and spraying. -
Page 16: Asymmetrical Tramlines
When the first pass drill working full working width. Working width of the drill and sprayer overlap covering the entire portion of the surface of the field on the first pass. This method is required to perform two consecutive passes to the disabled one pathway in the drill. KONNECT 1000 EN 160117... -
Page 17: Rules For Selection Of Tramline Path
TRAMLINING 8.3 RULES FOR SELECTION OF TRAMLINE PATH Press the function key “MENU OK”. Further, by pressing the “up-down” to select the right conditions for our tramlining system. It is helpful to our table with the settings depending on the working width of the drill and the working width of the sprayer /spreader. See tables page: 16 - 18. -
Page 18: Tables Of Symmetrical Tramlines
4.50 m 36 m 5.00 m 40 m 6.00 m 48 m 2.50 m 23.5 m 3.00 m 27 m 4.00 m 36 m 25 m 2.50 m 3.00 m 30 m 4.00 m 40 m KONNECT 1000 EN 160117... - Page 19 TRAMLINING Seed drill Sprayer/ Path Symetrical tramline placement in one pass working spreader width width 2.50 m 28 m 3.00 m 33 m 4.00 m 44 m 10 11 2.50 m 30 m 3.00 m 36 m 4.00 m 48 m 10 11 33 m 2.50 m...
-
Page 20: Table Of Asymmetrical Tramlines
3.00 m 54 m 4.00 m 72 m 9+10 13 14 15 17 18 2.50 m 50 m 3.00 m 60 m 4.00 m 80 m 10+11 12 13 14 15 16 17 18 19 20 1 KONNECT 1000 EN 160117... -
Page 21: Notes
NOTES NOTES KONNECT 1000 EN 160117... - Page 22 6. NOTES NOTES...
- Page 23 330010560 KONNECT 1000 KPL EN You can always find the latest version of the manuals at www.kongskilde.com...
Need help?
Do you have a question about the KONNECT 1000 and is the answer not in the manual?
Questions and answers