[Digital Crystal Clear]: Fine-tunes each
•
pixel to match surrounding pixels. This
produces a brilliant, high-definition image.
[Dynamic contrast]: Enhances
•
contrast. A [Medium] setting is
recommended.
[Dynamic backlight]: Adjusts
•
brightness of the TV backlight to
match lighting conditions.
•
[MPEG artifact reduction]:
Smoothes out transitions on digital
pictures. You can switch this feature
on or off.
[Colour enhancement]: Makes
•
colours more vivid and improves
the details in bright colours. You can
switch this feature on or off.
[PC mode]: Adjusts the picture when a
•
PC is connected to the TV via HDMI or
DVI.
[Picture format]: Changes the picture
•
format.
[Picture size]: Adjusts the viewing area.
•
(When set to maximum, you might see
noise or a rough edge of an image.)
[Horizontal shift]: Adjusts the picture
•
horizontally for PC-VGA, DVI, HDMI or
YPbPr.
[Vertical shift]: Adjusts the picture
•
vertically for PC-VGA, DVI, HDMI or
YPbPr.
EN
16
Change picture format
1
Press
FORMAT.
» A picture format bar appears.
2
Press
to select a picture format.
» The selected picture format is
activated.
3
Press OK to confirm your choice.
Summary of picture formats
The following picture settings can be
configured.
Note
•
Depending on the format of the picture source,
some picture settings are not available.