Table of Contents
Advertisement
3
C
a
l
l
S
e
r
v
i
c
e
s
3
C
a
l
l
S
e
r
v
i
c
e
s
Enter a phone number by the keypad.
Press
to select a number from the calls lists.
Access Contacts and select a number from Phone or USIM.
2. Press
to dial out.
3. Press
to end the call.
Making Voice Calls Using Speed Dialing Numbers
You assign a phone number to one of the speed dialing keys, from to 2 to 9 respectively.
Then, in the standby mode, press one of the speed dial keys to dial the number that you have
assigned to this key. For more information, please refer to "Contacts/Speed Dialing
Numbers" on page 42.
Answering/Rejecting Incoming Calls
The phone will ring or vibrate when there is an incoming call. If the calling number has been
saved in Contacts, the name of the calling party will be displayed on the screen.
You can select an answering mode for your phone: "Open flip", "Any key" or "Send key".
The method for answering a call is different in different answering modes. To set an
answering mode, refer to "Settings/Call Setup/Answer Mode" on page 137.
You can also set the auto answer mode for your phone. For more information, refer to
"Settings/Call Setup/Auto Answer" on page 137.
Note:
The control key on the headset is available for answering or ending a call only. It
cannot be used to reject an incoming call.
With the Auto Answer Mode Disabled
If you have disabled the auto answer mode of your phone, you can answer or end an
20
HUAWEI
Advertisement
Table of Contents
