Setting The Flash - Southern Telecom EMG900 Instruction Manual

Setting the FLASH

This feature allows the user to set the flash time required in each country or needed on
the PABX. Contact your local telecom provider to know the appropriate flash time.
1. Press and release the MENU button until FLASH is shown.
2. Press the button,
3. Select the required flash time (default is 600ms) by pressing the ▲ or ▼ and confirm
with the button. (80 / 100 / 270 / 300 / 600)
4. Press PHONE BOOK button to exit the set-up mode.
21