The OAW-6000-PS400 supports Power over Ethernet (POE), Serial Power over Ethernet (SPOE), and non-POE enabled line cards. The 400W PSU components are: 1. Captive screws (2) 2. Unit handle used to insert or remove the power supply Alcatel OmniAccess 6000 400W Power Supply Unit Installation Instructions...
Page 2
OmniAccess 6000 400W PSU Installation Notes: Installation Guide —Do not use the handle to lift the Alcatel Wireless LAN AUTION switch. 3. LEDs When installed correctly, the bottom LED (AC OK) and the middle LED (DC OK) should be green. The top LED (OTP - Over Temperature Protection) should be off.
Page 3
Press firmly to engage the connectors, but do not use excessive force. 4. Secure the power supply. Use the screwdriver to push in the module’s captive fastening screws and turn them clockwise until moderate resistance is felt. Do not over-tighten. Alcatel OmniAccess 6000 400W Power Supply Unit Installation Instructions...
Page 4
OmniAccess 6000 400W PSU Installation Notes: Installation Guide 5. Attach the power cord to the power supply. Plug an appropriate power cord into the power input socket. The socket accepts a power cord with a standard IEC320 plug. —For proper safety and performance, the power cord must be...
Contacting Alcatel Web Site Main Site http://www.alcatel.com Support http://www.alcatel.com/enterprise Telephone Numbers Main US/Canada (800) 995-2612 Main Outside US (818) 880-3500 Alcatel OmniAccess 6000 400W Power Supply Unit Installation Instructions...
Page 6
OmniAccess 6000 400W PSU Installation Notes: Installation Guide Part 031655-00 May 2005...