Common Functions; Power Switch; Dubbing Speed Switch; Note For Soft-Touch Mechanism - Sharp GF-800Z Operation Manual

6

COMMON FUNCTIONS

• DUBBING SPEED SWITCH

Set this switch to the NORMAL position, except when using
the high speed dubbing function.
If you set it to the HIGH position when a tape is played
back, the equalizer circuit for high speed operation will be
actuated and the high range of the tape will be reduced.
MECHANICAL NOTES

NOTE FOR SOFT-TOUCH MECHANISM

When the batteries are too weak, the unit will not function by
pressing the PLAY button or • REC button, and then the
• PLAY button or • REC button can not be returned com-
pletely by pressing the STOP/EJECT button. In that case,
change the batteries or use an AC supply lead without opening
the cassette compartment.

•POWER SWITCH

Before starting any function such as decks and radio, set
the POWER switch to the ON position. If the deck is in
operation, turn the POWER switch off after stopping tape
transport by pressing the "± STOP/EJECT button.
The deck is not turned off even after turning the POWER
switch off while the sleep timer or automatic ON timer is
in operation.
MODE SELECTION
Before changing from one mode to another while the unit is in
operation for recording, playback, fast forward or rewind mode,
press the
For the APLD operation, it is not necessary to press the
STOP/EJECT button in advance : to set it press the
STOP/EJECT button.
REW button.
8
FF or