Internal Menu - Nicolaudie STICK-DE3 Manual

Internal Menu

MODE (M) : Manages the on/off button and the 4 modes (dimmer, speed, color, scene)
M OFF enable : enables/disables the use of the on/off button so that the controller is permanently on
M Dimm. enable : when enabled, scenes can be made brighter or darker
M Color. enable : when enabled, the color of a scene can be changed
M Speed. enable : when enabled, dynamic scenes can be made faster and slower
M Scene. enable : when enabled, the scene can be changed
M Auto mode : when enabled, the controller will revert to the default mode after it has been left for a specified period of time
M Auto time : the amount of time the controller will wait before reverting to the default mode
M Default : the default mode which the controller will revert to after a certain amount of time
M Dimmer 100% : when enabled, the dimmer mode will adjust between 0% and 100% without saturating to white between 100% and 200%
M Lock Control : Once this is enabled, you can hold the dimmer button for 5 seconds to enable/disable lock mode. It's automatically activated
after 120 seconds. When lock is activated, you'll see a red border around the screen
Arrows (A) : Allows you to adjust which modes can be controlled by the arrows
A Dimmer enable : allows for the Dimmer mode to be controlled by the arrows
A Color enable : allows for the Color mode to be controlled by the arrows
A Speed enable : allows for the Speed mode to be controlled by the arrows
A Scene enable : allows for the Scene mode to be controlled by the arrows
A Default : the mode to jump to when the arrows are pressed, if the arrows are not enabled on the selected mode
Pallet (P) : Allows you to adjust which modes can be controlled by the palette wheel
P Dimmer enable : allows for the Dimmer mode to be controlled by the palette wheel
P Color enable : allows for the Color mode to be controlled by the palette wheel
P Speed enable : allows for the Speed mode to be controlled by the palette wheel
P Scene enable : allows for the Scene mode to be controlled by the palette wheel
P Default : the mode to jump to when the palette is pressed, if the palette is not enabled on the selected mode
Scene (S) : Scene management
S 0(off) enable : displays an empty off scene before scene 0 in each area
S Pause enable : allows a scene to be paused if the scene mode button is held for 1 second
S Stop enable : allows a scene to be stopped if the scene mode button is held for 4 seconds
S Fade config : manages fading between scenes
From Show : the fade time set inside the show file will be used
Force : the automatic fade time set in the menu will override all fadetimes in the show file
Force Max : the controller will look at the show file fade time and the menu fade time and use the greatest
Force Min : the controller will look at the show file fade time and the menu fade time and use the smallest
Never : the controller will never fade between scenes
S Fade time : the time of the automatic fade between scenes
S Setting management : determines how dimmer/speed/color overrides are saved
SaveAlways : the dimmer/speed/color overrides all scenes until the reset button has been pressed
NeverSave : the dimmer/speed/color is never saved
AutoReset : the dimmer/speed/color is saved on the current scene
S Trigger : sets the scene triggering mode. Time Delay and Scene Butt allow for scenes to be scrolled through without playing
Auto : the scene will be triggered as soon as it's selected
Time Delay : a short delay is added before a scene is triggered
Scene Butt. : the selected scene will not play until the scene button is pressed
First Start (F) : Default settings when the unit is first started
F Scene Nr. : specify a default startup scene. 'Scene Star' mode must be enabled in the Scene Mode options (below)
F Start Scene Mode : manages the startup mode for scene selection
Scene Star : activates a specific scene at startup. The scene number is set in the F Scene Nr. option (above)
Recovery : activates the previous calendar/time triggered scene. Useful for recovering from power interuptions
Off: activates the off scene
F Display Time : when enabled, the time will be displayed on the screen at startup
F Display Firm : when enabled, the firmware version will be displayed on the screen at startup
F Start Trigger : when enabled, in combination with Recovery mode, a calendar triggered scene will start from where it was last playing,
after a power interuption. When disabled, a scene will start at the beginning.
Trigger (T) : Manages the controllers external triggering properties
T Time enable : enables the clock triggering
T Ports enable : enables the 8 dry contact ports
T RS232 enable : enables scene triggering by RS232
T IR enable : enables the infra red port (disabled by default to prevent interference)
T UDP enable : allows the controller to send and receive UDP messages required for network control
T Blackout port : enables the blackout relay output which is triggered when the stanby putton is touched
Ethernet (E) : Manages the controller's network settings
Ethernet : Enables the Ethernet socket on the controller
Dynamic IP Addr : enables dynamic IP addressing (DHCP) which allows the controller to obtain an IP address from a router
Sync Blackout: when this open is enabled, all other controllers on the network will go into standby when the standby button is pressed
Enable NTP : enables Network Time Protocol. The controller will synchornise the clock with the internet if a connection is evailable
© Nicolaudie-Sunlite 1989-2016. All rights reserved. We reserve the right without notice to amend the technical information and specifications.
Sunlite Touch-sensitive Intelligent Control Keypad
Technical datasheet Revision date 7 Dec 2016
Ref. STICK-DE3 Page 5
www.nicolaudie.com V 1.07