Preparation For Starting Operation; Installing Transmitter Antenna - Fast Lane HUMMER Owner's Manual

PREPARATION FOR STARTING OPERATION

1. ATTACHING ANTENNA TUBE
Pass the antenna wire through the antenna tube,
then insert the tube into the antenna tube holder.
If the antenna tube cannot be successfully inserted
into the antenna tube holder, try holding the root of
the antenna wire with fingers of one hand and
extending the wire with fingers of the other hand.
* Note: Be careful not to pull antenna wire too strong.

2. INSTALLING TRANSMITTER ANTENNA

Place the transmitter antenna into the antenna
holder to screw it in clock-wise.
Do not extend the antenna when installing. It's
dangerous.
If the antenna is not screwed in securely, the
vehicle may move erratically. Screw the antenna
securely.
3. INSTALLING THE BATTERIES
TRANSMITTER
To remove the battery lid, press the
point marked "OPEN" and pull the lid
downward.
Antenna wire
Antenna tube
Antenna tube holder
Install battery make sure that (+) and (-) poles
are positioned properly.
* Dispose the used batteries separately from
other trash.
3
Transmitter
antenna
One 9 volt
(006P) battery