Summary of Contents for IDENTEC SOLUTIONS i-B2 S/NA
- Page 1 S/NA User’s Guide Version 1.0 IDENTEC SOLUTIONS AG Millennium Park 2 A-6890 Lustenau Austria Tel: +43 (0) 5577 87387 - 0 Fax: +43 (0) 5577 87387 - 15 info@identecsolutions.at www.identecsolutions.com...
- Page 2 Proprietary Notice This document contains confidential information proprietary to IDENTEC SOLUTIONS and may not be used or disclosed to other parties in whole or in part without prior written authorization from IDENTEC SOLUTIONS. Disclaimer and Limitation of Liability IDENTEC SOLUTIONS AG and its affiliates, subsidiaries, officers, directors, employees and agents provide the information contained in this Manual on an “as-is”...
- Page 3 S – User’s Guide Radio Frequency Compliance Statement IDENTEC SOLUTIONS AG. is the responsible party for the compliance of the following devices: MODEL: i-B2 S i-CARD CF i-D TAGS i-Qxx TAGS FCC ID: OO4-ILR-IB2NA OO4-ILR-ICARDCF OO4-ILR-ID2 OO4-ILR-IQ8T or OO4-ILR-IQR...
- Page 4 i-B2 S – User’s Guide European Notification according R&TTE Directive (i-B2 S/EU) This equipment complies to Art. 6.4 of R&TTE Directive (1999/5/EC) and can be used in the following European countries: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Italy, Ireland, Luxembourg, Netherlands , Norway, Portugal, Switzerland, Sweden, Spain, United Kingdom, Czech Republic, Cyprus, Estonia, Hungary, Lithuania, Latvia, Malta, Poland, Slovenia.
-
Page 5: Table Of Contents
i-B2 S – User’s Guide Table of Contents 1.0 Overview __________________________________________6 2.0 Functionality ________________________________________6 2.1 Telegram content __________________________________________ 6 2.2 Programming _____________________________________________ 6 Appendix A: Technical Specifications ____________________________7 Appendix B: Battery lifetime__________________________________8 Appendix C: Tag mounting___________________________________9 C.1 Rivets ______________________________________________9 C.2 Screws ____________________________________________10 C.3 Taping (on metal surfaces) ___________________________11 C.4 Mounting with Suction Cups ___________________________12 Version 1.0... -
Page 6: Overview
Overview This guide explains how to install and operate the beacon tag i-B2 S. Functionality The i-B2 S/NA is a high performance maintenance free beacon tag to be used with IDENTEC SOLUTIONS’ ® Intelligent Long Range (ILR ) beacon readers. Its’ robust and slim housing allows easy mounting on most of the assets to be tracked. -
Page 7: Appendix A: Technical Specifications
i-B2 S – User’s Guide Appendix A: Technical Specifications Performance Read range to i-PORT R2 Up to 100 m (300 ft) (free air) Read range to i-CARD R2 Up to 100 m (300 ft) (free air) Operating frequency 868 MHz (EC) or 915 MHz (NA) Operation Transmits in regular intervals a pre-programmed data string Repetition rate (ping rate) -
Page 8: Appendix B: Battery Lifetime
i-B2 S – User’s Guide Appendix B: Battery lifetime Life time of the whole tag depends on battery lifetime and therefore primarily on ping rate and battery capacity. The i-B2 S can be equipped with either a 560 mAh or a 2,100 mAh battery. Following table shows these influences: Battery 560 mAh Battery 2,100 mAh... -
Page 9: Appendix C: Tag Mounting
i-B2 S – User’s Guide Appendix C: Tag mounting C.1 Rivets Blind Rivets 5 x ... Important Information: (1) A temperature of at least +10°C (+50°F) must be maintained during riveting to prevent the casing from cracking. (2) Always position the blind-rivet gun straight down on the rivet site and all the way to the rivet socket. (3) On occasion, a tag casing has been damaged through improper handling of the blind-rivet gun (slanted positioning of the gun to access the rivet socket). -
Page 10: Screws
i-B2 S – User’s Guide C.2 Screws i.e. cylinder head or lenticular head screws M5 x i.e. M5 hexagonal locknut with M5 washer M5 hexagonal nut, but together with spring washer or M5 Nordlock washer Important Information: (1) Only screws with cylindrical heads are suitable for mounting the tag. We do not advise using counter- sunk screws. -
Page 11: Taping (On Metal Surfaces)
i-B2 S – User’s Guide C.3 Taping (on metal surfaces) Double-sided Tape The following double-sided tapes from 3M are currently being used/recommended: On level, flat surface: 3M acrylic foam tape #5952 F (Temperature: 120°C [248°F], short-term at 150°C • [300°F]) On uneven, slightly curved surface: 3M acrylic foam tape #4959 F (Temperature 150°C [300°F], short-term •... -
Page 12: Mounting With Suction Cups
i-B2 S – User’s Guide C.4 Mounting with Suction Cups Glass plate (clean, free of fatty substances) Suction cup 35mm [1 3/8 inch] with threaded bolts M4 x 10 M4 washer M4 screw nut M4 screw nut 10 mm [0.4 inch] bushing with M4 inside thread *) Supplier: i.e.