Related Manuals for 3nStar RPT005
Summary of Contents for 3nStar RPT005
- Page 2 Thermal Receipt Printer Attention: Place printer on a stable surface. Choose a firm, level surface that is free from vibration. Don't use the printer in an environment with high temperature, high humidity or poor air quality. Connect the power adapter to a properly grounded receptacle. Avoid using the same power socket with other high energy consumption devices to avoid power fluctuations.
- Page 3 Thermal Receipt Printer Packing User Manual 1 Piece Printer 1 Piece Serial & USB Power cable 1 Piece Power adapter (24 V) 1 Set Paper roll 1 Roll CD with Drivers/Software Features 80mm large capacity paper housing High speed text and graphics printing ...
- Page 4 Thermal Receipt Printer Specification Printing method Direct thermal Black mark detection Supported Roll paper size 79.5mm +/- 0.5mm Column capacity 576 dots/line or 512 dots/line Character size Font A: 12x24 dots Font B: 9x17 dots Simplified/traditional Chinese: 24x24 Command Compatible with ESC/POS Interface (optional) USB+Serial Auto cutter...
- Page 5 Thermal Receipt Printer Adaptor input voltage AC 100V/220V, 50-60 Hz Power supply DC 24V-2.5A Printer input voltage DC 24V-2.5A Cash drawer control DC 24V-1A Working environment Temp. (0-45°C, humidity (10-80%) Storage environment Temp. (-10-60°C, humidity (10-90%) Drivers Win9X/Win 2000/Win 2003/Win XP/Win7/Win 8/Win 8.1/Win 10/Linux Connection 1.
- Page 6 Thermal Receipt Printer Paper Roll Loading 80mm thermal paper roll is recommended for 80mm series printers. Loading paper into the printer: 1. Open top cover 2. Drop paper roll into slot indicated in (b). 3. Pull the paper roll into the paper holder (c). 4.
- Page 7 Thermal Receipt Printer Button Name with LED light and function 1. FEED button. Press to feed paper manually. 2. POWER indicator. Light on means connected properly. Blue and red light means paper low. 3. ERROR button. Alarm is indicated with out of paper, cutter error or print head overheating.
- Page 8 Thermal Receipt Printer Reset When printer is turned on, turn it off. Press "FEED" button and turn on the power at the same time. After twenty (20) seconds, release the FEED button, reset is successful if a beep is heard. Driver installation 1) Install driver and print through Win OS.
- Page 9 Thermal Receipt Printer 2. Select folder where application will be installed 3. Click "Install" to begin the installation...
- Page 10 Thermal Receipt Printer 4. The installation process will update the status 5. Click "Finish" to complete the installation...
- Page 11 Thermal Receipt Printer Choose "POS-80C" from the Install Configuration...
- Page 12 Thermal Receipt Printer Select "Check USB Port" for POS Printer Driver Choose "USB001" in the POS Properties Control Panel...
- Page 13 Thermal Receipt Printer Select "General" tab and print test page Printing directly via port: Does not require installation of printer driver. Choose directly at appropriate port (i.e., USB, Serial) in software. Printing via port uses commands to control printer ...
- Page 14 Thermal Receipt Printer Printing head cleaning steps: 1. Turn printer off, unplug the power cord. 2. Open top cover, take out paper roll. 3. Wait until printing head has cooled. 4. Clean printing head with swab and alcohol. Do not use water. 5.
Need help?
Do you have a question about the RPT005 and is the answer not in the manual?
Questions and answers