1. Manuals
  2. Brands
  3. SCANGRIP Manuals
  4. Compressor
  5. CANVIK CENTER
  6. Operating instructions manual

SCANGRIP CANVIK CENTER Operating Instructions Manual

Spring compressor
Hide thumbs Also See for CANVIK CENTER:
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

GB - Operating Instructions
DE - Bedienungsanleitung
FR - Instructions d'utilisation
ES - Instrucciones de uso
DK - Betjeningsvejledning
SCANGRIP
CANVIK CENTER Spring Compressor
Item no.:13.0001
Scangrip A/S
Rytterhaven 9
5700 Svendborg
DENMARK
www.scangrip.com
scangrip@scangrip.com
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CANVIK CENTER and is the answer not in the manual?

Questions and answers

Related Manuals for SCANGRIP CANVIK CENTER

Summary of Contents for SCANGRIP CANVIK CENTER

  • Page 1 GB - Operating Instructions DE - Bedienungsanleitung FR - Instructions d’utilisation ES - Instrucciones de uso DK - Betjeningsvejledning SCANGRIP CANVIK CENTER Spring Compressor Item no.:13.0001 Scangrip A/S Rytterhaven 9 5700 Svendborg DENMARK www.scangrip.com scangrip@scangrip.com...
  • Page 2 WARNING - ACHTUNG AVERTISSEMENT ADVERTENCIA – ADVARSEL Always carefully check that the jaws are correctly positioned! PLEASE PAY ATTENTION TO TEXT WITH THIS SYMBOL SAFETY THESE INFORMATION ARE IMPORTANT FOR IMMER überprüfen, dass der Federhalter korrekt montiert ist! Toujours vérifier soigneusement que les mâchoires sont positionnées correctement! Siempre carfully compruebe que las mordazas...

  • Page 3: Safety Warning

    Safety Warning Working safely with this tool is possible only when the operating and safety information are read completely and the instructions contained therein are strictly followed. The manual shall be kept in a known location and be easily accessible for operators and maintenance staff for the life of the product. ALWAYS WEAR PERSONAL PROTECTIVE EQUIPMENT AS PROTECTIVE CLOTHING, MASK, GLOVES, HELMET, SHOES AND ETC.

  • Page 4: Specifications

    WARNING The coil spring compressor is exclusively for coil springs compressing Wishbone and Mul- tilink Systems. This product is not for conical spring and ball spring. Any other or further use is considered as not intended and is forbidden! Specifications Wishbone and Multilink System Coil Spring Compressor including standard jaws Ø90-140 mm and a 40 Nm torque stick.

  • Page 5: Operation Warning

    Operation Warning How to detach the spring form the vehicle. Before each operation, check vehicle spring and make Upper jaw sure that spring compressor function well and no damage. Compressor • Before placing the coil spring compressor onto the spring, lift the vehicle until the wheel is completely free from the ground.
  • Page 6 How to install the spring on a car STEP 1: Make sure that both jaws are correctly positioned Fig. 1 STEP 2: Preload the coil spring compressor. Make sure that the jaws are STILL correctly positioned after preload because the jaws may slip eccentrically.

  • Page 7: Maintenance And Cleaning

    Maintenance and cleaning • MAINTENANCE PERSONEL should be qualified and trained in the compressor functions and failure modes, their rectification, operation and maintenance of the product. • Regular check period 1 month. When you find any damage or defor- mation, please stop use immediately and ask manufacturer for help. Never try to repair the product yourself.

Table of Contents