Table of Contents
Advertisement
Menu functions
Reject if larger than: determine the maximum
size for incoming e-mails. Your phone will reject
e-mails that exceed the specified size.
Download method: set whether the phone
downloads e-mail headers only or e-mail headers
and bodies borh.
Leave copy of messages on server: leave
copies of e-mails on the e-mail server after
retrieving.
•
Block list: specify e-mail addresses or subjects
you want to reject.
•
Email account: set up an e-mail account and
select an account to be used.
Current account: select an account.
Account settings: configure e-mail accounts
using different e-mail servers. Set the options for
each account:
Account name: enter a name for the currently
selected account.
User name: enter a user name.
Email address: enter your e-mail address.
60
SMTP server: enter the IP address or domain
name of the outgoing e-mail server.
SMTP port: enter the SMTP port number.
Connect to POP3 server first: connect to the
POP3 server before connecting to the SMTP server
to send e-mails.
Protocol type: select the protocol for the
incoming e-mail server. The remaining options
depend on the protocol type setting.
When the protocol type is POP3:
POP3 server: enter the IP address or domain
name of the server that receives your e-mail.
POP3 port: enter the POP3 port number.
User ID: enter the POP3 user name.
Password: enter the POP3 password.
Use SMTP authentication: enable SMTP
authentication, which requires the user to login
before sending e-mails.
Same as POP3: select if you want the SMTP
server to have the same parameters as the POP3
server.
Advertisement
Table of Contents
