Summary of Contents for Aerotec 32 PRO
- Page 1 Mobile Sand Blasting Machine 32 PRO English Article No.: 2009534 © pro)SALES GmbH - Ferdinand-Porsche-Straße 16 - 63500 Seligenstadt...
- Page 2 Complaints / spare part orders will be quickly and unbureaucratically processed, for this, please use the Eng. following contact information Tel.: +49 61 82 / 99 38 7 - 0 Fax:+49 61 82 / 99 38 7 - 20 E-Mail: info@aerotec.info Labelling: Product Safety - Prohibition Signs: Prohibition Sign In accordance with European Prohibition of loose items of Prohibition of jewellery, etc.
- Page 3 Scope of Supply: Operating pressure: 6,3 bar Air consumption: ca. 350 l/min 1 x Sand blast tank with accessories Threaded connection: 1 x Protective hood Recomm. hose diameter 9 mm 1 x Blasting hose 2 meters Weight: 19 kg 1 x Nozzle set (4 x) 1 x Funnel Artikel-Nr.
- Page 4 Do not dismantle the machine. Dismantling leads to about the connection or operation of the machine, subsequent malfunctions and defects. please contact pro)SALES GmbH / Aerotec Kompressoren / Ferdinand Porsche Straße 16 / Check the functionality before every use, and check 63500 Seligenstadt / Tel: 0049 (0) 6182-993870 especially the tightness of all fasteners and for leaks.
- Page 5 Always keep the machine in perfect condition. Observe The manufacturer cannot be held responsible for any the operating instructions for the cleaning, lubricating injury or damage arising from the non-observance of and changing of accessories. the general, applicable Regulations or the provisions contained in these instructions.
- Page 6 The Assembly in Individual Steps: Fix the pressure gauge to the suction line. Ensure that the pressure gauge can be easily read. Then screw the valve on to the line below. The nipple must now be connected to the valve, after that, fit the connection in to the line: Now assemble the blasting grip: Fix the nozzle of choice in the jaws, screw on a nipple and firmly...
- Page 7 10. Faults - Causes Rectification Fault Cause Rectification Sand is not No compressed air available. Connect the machine to the compressed air supply in delivered accordance with the connection diagram. Blasting medium is damp Replace the blasting medium with a dry medium. System is leaking.
Need help?
Do you have a question about the 32 PRO and is the answer not in the manual?
Questions and answers