Advertisement
Start pair
-
linking your CardPhone2
Start pair
-
linking your CardPhone2
1
a. To turn on your CardPhone2, press "Hang Up" button for a while.
You can also turn it off by pressing "Hang Up" button for at least 2 seconds.
b. CardPhone2 will be turned on with amber LED blinking.
c. To start pair-linking, hold "Function" button for approximately 3 seconds.
There will be a short tone if CardPhone2 is ready to be paired.
d. Blue LED will quickly flash if it is ready to be paired.
2
Power on
(Hang Up Button)
Confidential !!!
Pair-Linking
(Function Button)
5
Advertisement
