Wlan Module Install - LG PCRCUDT2 User Manual

User Manual
8. At the Send E-mail Verification
screen, review the information
to be sure everything is correct,
and then tap OK (4).
9. Log into your email and click
on the link to confirm your
registration through the LG
website.
10. Proceed to LG Smart AC
Module Installation section in
this manual.
LG Smart AC
Module Installation
Before your app can communicate
successfully with your indoor unit(s), you must install the WLAN
module. Note that you will need one WLAN module for each indoor
unit that you plan to control through your app.

WLAN Module Install

1. Open the LG Smart AC box, and remove the
module from the plastic wrapper.
2. Verify that indoor unit is turned off and power is cut
off at the outdoor unit's input power circuit breaker.
3. Open the front panel of the indoor unit and
remove the USB port plastic
cap (1) and insert WLAN
module (2). Close front panel
of unit.
4. Turn power on by turning
back on through the power
breaker and then turn indoor
unit on.
5. Optionally, place a WLAN
module into each indoor unit
as necessary before proceeding.
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
4
13