How To Set The Picture Optimization - BenQ FP73G User Manual

1 7
1 1

How to set the picture optimization

The easiest way to obtain an optimal display is to use the
optimize and adjust the screen settings automatically for you. Refer to
monitor on page 23
If you wish to, you can always adjust the screen settings manually using the buttons on the
monitor panel. To assist you in this endeavour, BenQ has provided a screen test image utility
which you can use to check for screen color, grayscale and line gradient display.
To make sure the i key function performs well, you have to select one of the supported modes. If
i
the key does not work properly and the NON PRESET MODE message is on the OSD, it means
you are not using one of the supported modes. Please set your monitor to use one of the
supported modes as listed at the end of this manual.
1. Run the test program auto.exe from CD-ROM. You could also use any other image, such as
the desktop of your operating system. However, we recommend that you use auto.exe. As you
run auto.exe, a test pattern displays.
2. Press the ikey button on the monitor.
3. Press the Enter key to access the monitor On-Screen Display (OSD) menu.
4. If you notice a vertical noise (like a curtain effect-shimmering of vertical lines), press the
or keys to select Geometry and press the Enter key. Then press the
Pixel Clock and press the Enter key again. Then, press the
until the noise disappears.
5. If you notice a horizontal noise, press the
Enter key. Then press the
press the or
22 How to set the picture optimization
for button locations and functionality.
or keys to select Phase and press the Enter key again. Then,
keys to adjust the monitor until the noise disappears.
i
key function. Press the
How to adjust your
or key to adjust the monitor
or keys to select Geometry and press the
i
key to
or keys to select