MA110 Be sure to choose a location that is flat and has clearance above the unit to Ÿ WARNING AND COMPLIANCE prevent any damage, as well as allow for ventilation. Impor tant Safety Instructions Before drilling any holes, carefully inspect the area underneath and behind the Ÿ...
If you take a few minutes to look through it, you'll learn how to use all the features of your new Jensen receiver for maximum enjoyment. Features Features of the Marine Audio MA110 include: Ÿ Dimmable LCD Backlit Control, TFT Display Waterproof iPx6 Ÿ...
MA110 INSTALLATION Impor tant Notes Before you begin, always disconnect the negative battery terminal. Ÿ Ÿ Before final installation, test the wiring connections to make sure the unit is connected properly and the system works. Consult with your nearest dealer if installation requires the drilling of holes or Ÿ...
MA110 WIRING DIAGRAM WIRE COLOR DESCRIPTION PURPLE RIGHT REAR SPEAKER(+) PURPLE/BLACK RIGHT REAR SPEAKER(-) BLACK RIGHT FRONT SPEAKER(+) GRAY BLACK ANTENNA GRAY/BLACK RIGHT FRONT SPEAKER(-) WHITE LEFT FRONT SPEAKER(+) BLUE YELLOW POWER AMP REMOTE AUX IN-RIGHT LEFT FRONT SPEAKER(-) WHITE/BLACK...
MA110 BASIC OPERATION Audio Settings Press button (2) to access the audio settings. Rotate VOL/ENTER knob (4) to navigate through the following menu setting items: Equalizer (TREBLE, BASS), Loudness (ON/OFF), Balance & Fade and System Settings. Press VOL/ENTER buttons (4) to select the item. The unit will automatically exit the Audio Settings after seven seconds of inactivity.
Page 8
MA110 Press VOL/ENTER knob button (4) to active the brightness control, then rotate VOL/ENTER knob (4) clockwise or counter-clockwise to adjust desire brightness from level “1” to “10” for night mode. Auto Mode Automatically switches illumination from Day mode to Night mode when illumination trigger lead is energized +12VDC.
MA110 Save Presets TUNER OPERATION Rotate VOL/ENTER knob (4) to select desired location, press and hold VOL/ENTER button (4) to save current station in the selected desired Preset Stations. Delete Presets Rotate VOL/ENTER knob (4) to select the location, press and hold button (5) to delete the station saved in the location.
BLUETOOTH OPERATION button (4) to temporarily remove the Bluetooth connection. The connection can be The MA110 includes built-in Bluetooth technology that allows you to connect this re-established trough your phone menu by selection the MA110 for connection or unit to Bluetooth devices for streaming audio playback.
Page 11
Bluetooth mobile device when the power is restored. Press and hold VOL/ENTER button (4) to enter Bluetooth quick pair. The screen will display message “Verify Bluetooth is active on device and select: “MA110”” and will be available to pair for 2 minutes.
After downloading and installing MARINE AUDIO app on your device, pair your electronic supply shops. device to the MA110 as stated above for Bluetooth paring. Once your device is paired you can open the app and use with your MA110 radio.
MA110 SPECIFICATIONS TROUBLESHOOTING FM Tuner Problem Solution Tuning Range (USA)..............87.5 to 107.9 MHz If the power supply is properly connected to the vessel's accessory No power Tuning Range (Europe)............87.5 to 108.0 MHz terminal. but the engine is not on, switch the ignition key to "ACC"...