Advertisement
Unpacking
Carefully lift unit out of shipping container, and inspect
immediately for shipping damage. Your Stove was
shipped in a carton designed to give it maximum
protection. It was thoroughly inspected before leaving
the factory. File any claims for shipping damage or
irregularities directly with the carrier.
Installation
WARNING:
Electrical shock hazard. This is high
voltage equipment. Make sure main disconnect is off
before connecting stove.
Component Assembly
NOTICE
Unit must only be installed and operated
with legs provided by manufacturer.
Legs are shipped with unit in a plastic bag. Screw in the
legs hand tight. Level unit after final installation.
Height may be adjusted by turning the feet up or down
as desired.
Clearances
Distance required between combustible and non-
combustible material: 1" rear and 1" sides.
Electrical Installation
FOR QUALIFIED SERVICE PERSONS ONLY
Before connecting the stove read the electrical
specification label located on the back of unit. Verify
that the power supply available matches the
information on this label.
Preparing Stove
Before using stove for the first time, heat elements for
three to five minutes to burn off protective coating.
This also hardens the surface of the solid heating
elements.
Electric Short Order Stove
Cleaning
CAUTION:
To avoid burns, allow stove to cool
before cleaning.
Solid heating elements are easily cleaned with a damp
cloth after each use. Clean dirt and spills with powder
cleanser and a non-scratch scrub pad. Wipe off cleanser
with a damp cloth. After cleaning, rub a few drops of
cooking oil onto the surface of the elements, and then
switch on the elements for a few minutes to re-harden.
Stainless steel exterior surfaces can be cleaned with
powder cleanser and a non-scratch scrub pad, rubbing
with the grain of the stainless steel. Rinse and wipe dry,
and then polish with a soft cloth.
CAUTION:
Disconnect power from stove before
attempting electrical repairs.
If you need help, call Grindmaster-Cecilware Technical
Service Department, (502) 425-4776 or (800) 695-4500
(USA & Canada only) (Monday through Friday 8 AM - 6
PM EST). Please have the model and serial number
ready so that accurate information can be given.
Prior
authorization
Grindmaster- Cecilware for all warranty claims.
Grindmaster-Cecilware provides the industry's
BEST warranty. Visit our website at GMCW.com
for warranty terms and conditions.
Cecilware
®
must
be
obtained
from
3
Advertisement
