Nokia 7250i User Manual page 102

• Voice tags are not language-dependent. A voice tag depends on the
speaker's voice.
• Voice tags are sensitive to background noise. For best results, record
them and make calls in a quiet environment.
• When recording a voice tag or making a call by saying a voice tag,
hold the phone in the normal position near to your ear.
• Very short names are not accepted. Use long names and avoid similar
names for different numbers.
• Voice tags must be shorter than 2 seconds. Record them and make
calls in a quiet environment.
Note: You must say the name exactly as you said it when you
recorded it. This may be difficult in, for example a noisy
environment or during an emergency, so you should not rely solely
upon voice dialing in all circumstances.
1 Press and hold the Contacts selection key.
When you hear several beeps and Please speak now appears, release
the button.
Note: If you have the optional headset attached, press and hold
the headset button. When the phone beeps and Please speak now
appears, release the button.
2 Pronounce the voice tag clearly into the microphone. When the phone
finds the voice tag, Found appears, and the phone automatically dials
the number.
If the phone does not locate a number, No match found appears.
If you are using the headset and the phone does not locate the number, you
will hear an error tone and No match found appears. To start voice dialing
again, press and hold the headset button immediately after the error tone.
WORK WITH AN EXISTING VOICE TAG
After you have associated a voice tag to a command, you can choose one
of the following options:
[ 102 ]