Merlin ActiFit Lite Instruction Manual

Thank you for purchasing this Merlin Product. Please read the
instruction manual carefully before using the product.
The documentation provided will allow you to fully enjoy all the
features this unit has to offer.
Please save this manual for future reference.
Instructions
Charging your ActiFit Lite
Before using the ActiFit please fully charge it by removing the side of
the bracelet. Gently move it from side to side and slide off the strap to
reveal the USB port. Connect this USB port to any USB charger.
Charging time is expected to take 2 hrs.
Wearing the device:
Place the device around your wrist ensuring the sensor is in contact
with your skin and stationary. Then secure the strap in the adjustment
hole.
Power ON:
To Power ON the device, press down the touch sensor button for 3
seconds.
Power OFF:
To Power OFF the device, press down the touch sensor button for 3
seconds and select "OFF".
Setting up ActiFit Lite:
1) Download and install the 'Day Day Band' App
Supported Devices are Android 4.4 or above and iOS 7.1 or above
devices Steps to download the App: Scan the QR code and download
the app OR search the App "Day Day Band" from the Google Play or
Apple App Store and download it on your smartphone.
2-Set-Up your ActiiFit LiteBand
Once the app is installed, open the App to get started. You will be
guided through the process of creating a personalized account,
connecting and pairing your ActiFit Lite to your mobile device.
Creating an Account:
Proceed to enter all the requested personal information to create an
account.
Connecting and Pairing your Device:
Once you are done entering your personalized information, you will be
guided through a brief introduction of the features and then prompted
to connect your device by pulling down on the Devices Page to search
for devices and selecting Action HR. Please make sure that the
Bluetooth function on your device is ON and that your device is Fully
Charged. Once the App is successfully connected to your device it will
automatically prompt you with a Bluetooth Pairing Request. Select Pair
to complete the connection.
1