Page 3
Use Only in Office-Type Indoor Setting The converter is designed to be used in office-type indoor environments. Do not operate high voltage probes: In the presence of noxious, corrosive, flammable fumes, gases, vapors, chemicals, or finely-divided particulates. In environments where there is a danger of any liquid being spilled on the probe.
Please utilize your local WEEE collection facilities in the disposition of this product. Introduction The CT3197B High Voltage Probe BNC Converter is designed as an impedance converter to adapt Cal Test High Voltage Oscilloscope Probes to Digital Multimeters (DMMs) that feature 10MΩ...
CT3956 BNC female to sheath banana plug adapter From Probe To DMM Figure 1 CT3197B: Description Usage Instructions Connect the impedance converter to BNC Adapter Connect HV probe to assembled converter Plug assembled converter into DMM 450907-001 Rev. A caltestelectronics.com...
Specifications All specifications apply to the unit after a temperature stabilization time of 20 minutes over an ambient range of 25°C ± 5°C. PL-10N Electrical and Mechanical Characteristics Bandwidth 50 MHz Accuracy ± 0.5% Maximum Input Voltage 250 VDC/ 200 Vrms (DC/AC) Maximum Working Power...
Units returned to Cal Test Electronics that have been subject to abuse, misuse, damage, or accident, or have been connected, installed, or adjusted contrary to the instructions furnished by Cal Test Electronics, or that have been repaired by unauthorized persons, will not be covered by this warranty.