1. Manuals
  2. Brands
  3. Elite Prime Vision Manuals
  4. Projection Screen
  5. EDGE FREE Dark Star eFinity Series
  6. User manual

Elite Prime Vision EDGE FREE Dark Star eFinity Series User Manual

Ambient light rejecting fixed frame screen
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Dark Star eFinity Series
Screen
EDGE FREE® Ambient Light Rejecting Fixed Frame
USER'S GUIDE
Congratulations on your new Dark Star eFinity purchase! The screen material included is our ISF certified
Dark Star 9 which is a reference quality front projection material, precisely formulated for environments with
minimal control over room lighting. It was designed to enhance picture brightness, offer accurate color fidelity,
and improve contrast levels. The Dark Star 9 is best for family rooms, educational facilities, conference rooms
or any applications in which incident light is a factor.
Cautionary notice for the Dark Star 9 material
The Dark Star 9 Screen material is composed of high quality sensitive multi-layer projection material. Please
follow the precautions below for proper care procedures and to prolong the life of your screen.
Failure to use [these safeguards] will result in voiding your warranty
1. Avoid using any chemical compounds or harsh abrasives which will result in permanently damaging the
screen material.
2. Use only a soft microfiber cloth with mild soap and water to clean the screen material.
3. Please wear a pair of clean, powder-free glove in the process of installing and operating the screen to keep
hand oil and dirt from being transferred to the viewing surface.
4. Be very careful when unrolling and handling the material. Lay the material flat only to avoid permanently
creasing the material.
5. Do not rub the cloth with force when cleaning to avoid permanently scratching the surface.
6. Do not touch the screen surface with sharp objects or allow the screen surface to come in contact with
anything other than the frame.
7. Use only a soft feathered brush to remove dust.
8. Dark Star 9 material damaged in handling, installation, or use is not covered under warranty.
U-00121
JA08292018
www.epvscreens.com
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EDGE FREE Dark Star eFinity Series and is the answer not in the manual?

Questions and answers

Related Manuals for Elite Prime Vision EDGE FREE Dark Star eFinity Series

Summary of Contents for Elite Prime Vision EDGE FREE Dark Star eFinity Series

  • Page 1 Dark Star eFinity Series Screen EDGE FREE® Ambient Light Rejecting Fixed Frame USER’S GUIDE Congratulations on your new Dark Star eFinity purchase! The screen material included is our ISF certified Dark Star 9 which is a reference quality front projection material, precisely formulated for environments with minimal control over room lighting.
  • Page 2 1. Frame and Edge Trim Parts List 2 pcs 2 pcs Main Frame Parts Edge Trim Parts item item vertical frame Part Part ½ horizontal frame Part Part ½ horizontal frame Part Part 2. Hardware Parts List U-00121 JA08292018 www.epvscreens.com...

  • Page 3: Frame Assembly

    Item Parts List Qty EF108H-DS9 EF124H-DS9 EF158C-DS9 Center Joints (1) Elbow Joints (2) M4x6 Screws Spring Hook Spring Top wall brackets Φ5x50 Wall Screws Hollow Wall anchors Bottom wall brackets Angle cover LED light strip clip Center Support Bar white gloves rods Frame Assembly Step 1: Place the soft padded EPE sponge on clean area on the ground where the screen will be assembled.
  • Page 4 Step 5: Insert the springs (e) into the grooves of the frame. The spring’s hooks should be facing the front side of the frame. For the correct amount of springs to place into the frame, please refer to the table listed below. For reference only as springs have been pre-insrted.

  • Page 5: Back Side

    Step 9: Insert the screen rods (n) through the sleeves according to the labels on each edge of the screen as illustrated below. Make sure all rods are properly inserted thru all ends of the sleeves. Rods should not go beyond the end of the material’s sleeve or under.
  • Page 6 ATTENTION: Do not proceed with the next step until confirming that the frame is within the marked lines on the back of the material. If the frame shifted out of place, adjust the material so it is within the marked lines. Step 11b: Follow the diagram below and make sure the attachments (5-12) are connected in sequence.

  • Page 7: Center Support Bar

    Center Support Bar Step 12: Insert the Center Support Bar (i) into the upper top groove on the back of the frame with the bottom end near the approximate center point of the frame and rotate it in at an angle so that both ends of the bar are in alignment with the groove.

  • Page 8: Notice To Installer

    Step 14: Install the angle cover (j) on each corner of the frame and install the LED light strip to hold down the angle cover (or just use the clips if LED kit will not be installed). Then insert the LED light clip (l) to hold the LED light strip in place.

  • Page 9: Wall Installation

    Wall Installation Step 15: Measure the overall length and height of the frame and drill holes for the top brackets. Line up the wall brackets with the drilled holes on the installation location and screw them in using a Phillips screwdriver. If not installing into a structural wood stud, use a hollow wall anchor then screw in the M5x50 wood screws with a screwdriver.
  • Page 10 Steps 11b and 11c. Solution 3: Pull and smooth out the material using your hand from the center to the corners (see page 7) For Technical Support or an Elite Prime Vision contact in your area, visit www.epvscreens.com U-00121 JA08292018...

This manual is also suitable for:

Edge free dark star efinity 9

Table of Contents