Put the machine with little pressure on the pipe to be grinded and work with lateral movements. Please take care that the PIPE-MAX is not inclined too much (belt could slip from the drive roller in case of an extreme inclined position).
Page 3
PIPE-MAX E) Belt change Grinding- and polishing belts are put over the front elastic grinding roller (inside the stainless-steel belt guiding -U-profile) The front roller is elastically pushed back by putting the belt over the back guide roller, ■ then release the front roller-ready!!
Page 5
PIPE-MAX Typ 1.600 - 220 V + 110 V 220 volts version: Pos. Art.-No. Description Pos. Art.-No. Description 003 52003-3 Screw 210 52210 Screw 004 52004-3 QUICK-LOCK cable 4,0m 211 52211 Spac er 100 52100-3 plastic cas e 213 52213...
Page 6
Gerd Eis enbl ätter GmbH Jeschkenstr. 10 DE-82538 Geretsried CE 94 Attachment to PIPE-MAX - Manual instruction ENGLISH NEDERLA NDS EC DECLARATION OF CO NFORMITY EC-KONFORMITEITSVERKLARING We declare under our sole responsibility that this product is in conformity Wij verklaren op eigen vera ntwoording, dat dit produkt voldoet aan de...