Countdown Timer Scope; Operation Instruction; Time Mode; Date Mode - philippi TWO magic Instruction Manual

7. Countdown timer scope: 99:59 ~ 00:00

8. LED backlight turns on for 10 seconds when both parts of
your PHILIPPI appliance are put together, when separated,
when any button is pressed or when countdown timer
reaches 00:00.
9. Sound controlled LED backlight.

Operation instruction:

1. Mode switch
Put both main unit and subordinate unit of your PHILIPPI
appliance together in a horizontal line, press MODE to switch
in sequence: time mode → date mode → alarm mode → timer
mode → temperature and humidity mode.
When main unit and subordinate unit are separated, only
humidity and temperature are displayed, press the MODE, only
the display of main unit changes.

2. Time mode

Put both main unit and subordinate unit of your PHILIPPI
appliance together in a horizontal line, display the default time
12:00 (AM) at 12h system.
At time display mode, press SET to enter time setting in
sequence: hour → minute → circularly.
Press UP or DOWN to set the values, press and hold UP or
DOWN to increase or decrease quickly.
At setting mode, press MODE or without any button operation
in 15 seconds quit from the setting and display the time.
With 12h display, the PM would appear on the display.
Time setting scope: hour from 1 to 12 or from 0 to 23, second
from 00 to 59, when the minute changed, the second would be 0.

3. Date mode

At time display mode, press MODE to enter date display mode,
the default date display is Jan. 01, 2013
At date display mode, press SET to set the date in sequence:
year → month → day, during setting press UP or DOWN to set the
values, press and hold UP or DOWN to increase or decrease quickly.
When month and day displayed, press UP or DOWN to check
the year, press again to go back to the month and day are
displayed.
Setting scope: month from Jan. to Dec., day from 1 to 31, year
from 2000 to 2099.
When year is displayed, Y is displayed, when month and day is
displayed, M and D is displayed.