Page 3
By choosing this watch you have entered the Louis Chevrolet universe! Being of Swiss origin and born just a few kilometers from our factory, we had to honor Louis Chevrolet, the illustrious man who made history. From car mechanics to watchmaking precision, there was only one step to take.
Page 4
Contact LOUIS CHEVROLET SWISS WATCHES SA En Roche de Mars 10 2900 Porrentruy - Switzerland info@louischevrolet.ch +41 (0)32 465 38 08 @louischevrolet louischevroletwatches @Louis_Chevrolet Louis Chevrolet Swiss Watches...
Technical specifications Watch presentation Quick date correction Setting the time Setting the date, day of the week, time p.10 Chronograph: Basic function p.12 Chronograph: Accumulated timing p.13 Chronograph: Intermediate or interval timing p.14 Adjusting the chronograph hands to zero position p.15...
Technical specifications 150 FEET 17.6 MM 24 MM 44 MM Case Movement 130 grams RONDA 8040.N 316L stainless steel Hours, minutes, seconds, date, retrograde days Sapphire convex two sides Split-seconds chronograph : anti-reflective crystal hours, minutes, seconds, 1/10 sec. Water resistant 100 meters / 330 feet Autonomy of 48 months Luminous hands and index...
Watch presentation 10.I 150 FEET 10.II 1 - Minutes hand Chronograph 2 - Days hand 7 - 1/10 second counter (hours counter after 30 min.) 3 - Hours hand 8 - Minutes counter 4 - Seconds hand 9 - Seconds counter 5 - Date 10 - Push-button I and II 6 - Crown...
Quick date correction - Pull the crown out to position B. (watch still running) - Turn the crown anticlockwise until the required date appears. - Push the crown back into position A.
Setting the time - Pull the crown out to position C. (watch stopped) - Turn the crown, until the current time is displayed. (remember the 24-hour cycle) - Push the crown back into position A.
Setting the date, day of the week, time (1/2) - Pull the crown out to position C. (watch stopped) - Turn the crown until yesterday’s day appears. (make round trips between 11:00 and 1:00 to pass the days faster) - Push the crown to position B. - Turn the crown anticlockwise until yesterday’s date appears.
Page 11
Setting the date, day of the week, time (2/2) - Pull the crown out to position C. (watch stopped) - Turn the crown until the correct date and day appears. - Continue to turn the crown until the correct time appears. (remember the 24-hour cycle) - Push the crown back into position A.
Chronograph: Basic function - Start the timing by pressing on I. - Stop the timing by pressing on I then read the measured time on the counters. - Press on II to reset.
Chronograph: Accumulated timing - Start the timing by pressing on I. - Stop the timing by pressing on I then read the measured time on the counters. - Restart the timing by pressing on I. - Stop the timing by pressing on I then read the total measured time on the counters.
Chronograph: Intermediate or interval timing - Start the timing by pressing on I. - Stop the timing by pressing on II then read the measured time on the counters. (the timing continues in the background)) - Restart the timing by pressing on II. (the chronograph hands are advanced to the ongoing measured time) - Stop the timing by pressing on I then read the final measured...
Adjusting the chronograph hands to zero position (1/2) If the chronograph hands are not in their correct zero positions, then they have to be adjusted. - Pull the crown out to position C. - Keep I and II pressed simultaneously for 2 seconds. (the second counter hand rotates by 360°.
Page 16
Adjusting the chronograph hands to zero position (2/2) - Adjust the second counter hand by pressing on I. - Press on II to adjust the next counter. - Adjust the 1/10 second counter by pressing on I. - Press on II to adjust the next counter. - Adjust the minutes counter by pressing on I.