Subscribe to Our Youtube Channel
Related Manuals for Ancona Comfort 6
Summary of Contents for Ancona Comfort 6
- Page 1 Comfort 6 ORB Wall Plug-In Installation and Operations Manual 13/01/2016 MAAN5206-01...
- Page 2 DRILL & BIT STAR HEAD SCREWDRIVERS FLAT HEAD SCREWDRIVERS PENCIL ALLEN KEYS MEASURING TAPE LEVEL ELECTRICAL REQUIREMENTS: 120V, 80W, 60Hz, 0.67A. MUST HAVE A GROUND CONNECTION. READ ALL INSTRUCTIONS IN THE MANUAL BEFORE INSTALLING THIS TOWEL WARMER. Parts for wall-mounted installation 4pcs 4pcs 1 pc (large)
- Page 3 1. Approved for domestic use only. 24” Do not use outdoors. Install in accordance with n onal and local codes Do not install in the shower, sauna or any wet locations 4. Make sure towel warmer is properly secured to the wall before use. WALL PLUG-IN INSTALLATION Step 1: Verifying installation parts Ensure all parts for mounting installation were supplied with your towel warmer.
- Page 4 Installation cont’d Step 3: Marking holes for wall mount posts (fig. 3) Take towel warmer with 4 wall legs mounted, as per step 2 Position against the wall where you will want to install the towel warmer Ensure that the electric plug will reach nearest outlet. Use light pencil to mark legs on the wall (you may want to erase the pencil mark following installation completion, so make sure you mark lightly) Fig.
- Page 5 CAUTION - Overlapping towels may increase towel warmer temperatures. PROPERLY HANG TOWELS. DO NOT OVERLAP TOWELS. Operation and Maintenance Instructions • After installation, connect the electric power and turn on the switch. The indicator light will show red and the towel warmer will start to work. •...
Need help?
Do you have a question about the Comfort 6 and is the answer not in the manual?
Questions and answers