Do you have a question about the AQE2000 and is the answer not in the manual?
Questions and answers
Summary of Contents for Air Quality Engineering AQE2000
Page 1
The new Portable Cartridge $ystemfromAir Quality Engineering Inc. is a complete self-contained media air cleaner for use in source capture applications in industry. The Model AQE2000 captures airborne contaminants such as welding smoke, grinding dust, plastic dust and other fine particles.
AIR QUALITY ENGINEERING MODEL AQE 2000 CARTRIDGE SYSTEM Airborne contaminants enter the AQE 2000 The cleaned air is then gently diffused out the bottom of the unit. When the filter gauge indi through the hood/arm assembly at a rate of cates that the cartridge filters are dirty, they are 1100 cubic feet of air per minute (cfm).
UNPACKING INSTRUCTIONS 1) Due to potential fire hazards, do not mix combustible materials with those that would be 1) Inspect the boxes for damage before signing the a potential source of ignition. delivery receipt from the carrier. If the boxes appear to have been damaged, note the damage on the Exam p les o f Potential Ignition Sources delivery receipt and have the carrier initial the...
2) Note the gauge reading when the filters are EXTENDING CARTRIDGE LIFE dirty. Once the back flushing is done, the gauge 1) Cartridge life can be extended by reading should be close to the gauge reading manually blowing out the cartridge filters. when the filters were new.
Need help?
Do you have a question about the AQE2000 and is the answer not in the manual?
Questions and answers