Advertisement
zRAMP operation – adding new Inputs:
The JVC camera Streaming Server settings should be matched with the Stream ID on the zRAMP.
Camera settings: Menu – System – Network – Settings – Live streaming – Server – Streaming Server
zRAMP settings: Inputs - New Input – Push
Latency is always fixed and selected in the camera settings depending on the quality of connection:
JVC Camera settings
Stream ID and Password settings on the camera Streaming Server and zRAMP input should be identical.
The zRAMP IP address should be "Global" when running server behind the router/firewall.
Start streaming - Input Status should switch to "connected" (green), Bitrate and IP address will be indicated.
Select input "TEST" and click "Start" to play test video file.
Use "Play with Flash" option to preview video. Flash needs to be enabled in the browser.
zRAMP operation – adding Outputs:
RTMP Output for YouTube
Camera Settings
Latency
Min
500 ms
Low
900 ms
Medium
4 sec
High
10 sec
UDP Output for ProHD Studio / vMix
Packet Loss Tolerance
5%
10%
30%
40-50%
zRAMP IP address
vMix IP address
Algorithm
Recommended for:
FEC, ARQ, ABR
Bi-directional conversation
ARQ, ABR
Event coverage
ARQ, ABR
zRAMP settings
RTP+SMPTE FEC Output for BR-DE900 decoder
Decoder IP
address
Advertisement
