Download Print this page

Advertisement

Quick Links

YH863 wireless headphones work in the 915MHZ of North America and the 863MHZ
of Europe open ISM band, for the family computer, TV, DVD, MP3, and other daily-use
audio-visual facilities, designed wireless listening .This product is a wireless
high-fidelity stereo headphones, technical project designed
technology, active noise reduction technology, ALC automatic level control
technology, high-precision PLL technology, energy saving features such as
automatic shutdown, so that the overall tone and compatibility in a very high
level
Transmitter technical parameter
Work voltage: 12VDC
Work current : 80mA(TYP)
Carrier Frequency : Usa 914/914.5/915MHZ
Audio input range: 0~2V(RMS)
Second harmonic suppression:>30dB
Channel separation:>50dB
Frequency response: 50~15000HZ
PLEASE READ THIS MANUAL THOROUGHLY
1. Indicator Light – Red light indicates that power is on; Green light indicates
that headphones are being recharged.
2. Power ON/OFF Switch -- This switch turns on the power and chooses one of two
transmission channels.
Note: Base and headphones must be set to the same channel.
3. Charge Socket – With rechargeable batteries installed inside, the headphones
are placed in the base and the charge prongs on the left earpiece should be inserted
into this Charge Socket. The batteries are then automatically recharged and the Green
Indicator light on
Europe 863.3/863.9/864.5MHZ
Manual
with stereo

Advertisement

loading

Summary of Contents for INDA YH863

  • Page 1 Manual YH863 wireless headphones work in the 915MHZ of North America and the 863MHZ of Europe open ISM band, for the family computer, TV, DVD, MP3, and other daily-use audio-visual facilities, designed wireless listening .This product is a wireless high-fidelity stereo headphones, technical project designed...
  • Page 2 the base turns on. 4. Left/Right Audio Input Jacks – Plug the Dual RCA Cable to these Audio Input Jacks in accordance with colour codes. Connect the other end of the Dual RCA Cable to the audio output jacks of an audio source (TV or other audio equipment). Use the “Y” adapter cable whenever necessary.
  • Page 3 • Ensure that both headphones and base are set to the same channel. • If a power adapter is used for supply of power to the base, make sure the power adapter is firmly plugged into the mains socket and its output plug is fully inserted into the Power Input Jack of the base.