Summary of Contents for IDVT LED-Wiz
- Page 1 Multiple LED-Wiz ActiveX Control Command Reference Advance Release v.89 Copyright 2006, IDVT Inc. / www.GroovyGameGear.com...
- Page 2 SOFTWARE is transferred to you. You further acknowledge that title and full ownership rights to the SOFTWARE will remain the exclusive property of IDVT and you will not acquire any rights to the SOFTWARE except as expressly set forth in this license. You agree that any copies of the SOFTWARE will contain the same proprietary notices which appear on and in the SOFTWARE.
- Page 3 Send Commands to the LED-Wiz command parser. Control Usage: Simply place the control anywhere on the main form of your application. This will expose “LED-Wiz” Object, which will allow you to control as many as 16 LED-Wiz devices directly from your own programs..
- Page 4 LED-Wiz with a device number of “1”. A “1” at the second position from the left indicates the presence of an LED-Wiz with a device number of “2”, and so on. A “0” indicates no LED-Wiz is present at that location.
- Page 5 Multiple LED-Wiz™ ActiveX Control V.89 Documentation (Preliminary) Ithaca Digital Visual Technologies Inc / www.GroovyGameGear.com LED-Wiz™ Command Parser Reference Output States: Command: Most x,x,x,x,y Parameters: Efficient! Description: Sets the state of all outputs plus Global Pulse Speed. The values are 8-bit representations of on/off states for banks .
- Page 6 Multiple LED-Wiz™ ActiveX Control V.89 Documentation (Preliminary) Ithaca Digital Visual Technologies Inc / www.GroovyGameGear.com LED-Wiz™ Command Parser Reference (continued) Output States: Command: Parameters: Description: Sets the State of a Single Output The value is an output number from 01 to 32 inclusive. Value is the state of the output,...
- Page 7 Multiple LED-Wiz™ ActiveX Control V.89 Documentation (Preliminary) Ithaca Digital Visual Technologies Inc / www.GroovyGameGear.com LED-Wiz™ Command Parser Reference Output Profile Settings: Command: Most Parameters: x,x,x,x,..x Efficient! Profile Settings for All Outputs. Description: Each of the 32 parameters coincide with the outputs numbered 1-32. A value of 0 to inclusive, sets the brightness or intensity of each LED using Pulse Width Modulation (PWM).
- Page 8 Multiple LED-Wiz™ ActiveX Control V.89 Documentation (Preliminary) Ithaca Digital Visual Technologies Inc / www.GroovyGameGear.com LED-Wiz™ Command Parser Reference (continued) Output Profile Settings: Command: y,y,y,y,y,y,y,y Parameters: Description: Sets the behavior profiles for a bank of 8 outputs. Bank 1 addresses the first 8 outputs, Bank 2, the second 8 and so on.
- Page 9 Multiple LED-Wiz™ ActiveX Control V.89 Documentation (Preliminary) Ithaca Digital Visual Technologies Inc / www.GroovyGameGear.com LED-Wiz™ Command Parser Reference (continued) Output Profile Settings: Command: rl,rh,y Parameters: Description: Sets random intensity / brightness to a range of outputs and optionally affects the states of the outputs in that range.
- Page 10 Multiple LED-Wiz™ ActiveX Control V.89 Documentation (Preliminary) Ithaca Digital Visual Technologies Inc / www.GroovyGameGear.com LED-Wiz™ Command Parser Reference Special Commands: Command: x,r,g,b Parameters: Description: Sets the Intensity (Red, Green and Blue) values of an RGB LED and then turns on the three corresponding outputs.
- Page 11 Sets the Global Pulse Speed for the automated pulse modes of the LED-Wiz hardware. This parameter affects all outputs with automated pulse modes active. The value can be a number from to , with 1 being the fastest pulse speed and 7 being the slowest.
Need help?
Do you have a question about the LED-Wiz and is the answer not in the manual?
Questions and answers