Related Manuals for Savi SMR-650
Summary of Contents for Savi SMR-650
- Page 1 User Guide Savi Mobile Reader SMR-650 for the Intermec 751G/A Mobile Computer and PC Version 1.0...
- Page 2 Savi, Savi SmartChain, SmartChain, the Savi logo, EchoPoint, the EchoPoint logo, and UDAP are trademarks or registered trademarks of Savi Technology, Inc. in the United States and other countries. Other product names mentioned in this guide may be trademarks or registered trademarks of their respective owners and are hereby acknowledged.
-
Page 3: Table Of Contents
Guides to Read ........12 Contacting Savi Support ......13 2 Assembling and Using the Intermec Holster Inserting the Mobile Device into the Holster . - Page 4 B Hardware Components SMR-650-212 Reader Components ..... . . 34 SMR-650-210 and SMR-650-213 Reader Components ..34...
-
Page 5: About The Savi Mobile Reader Smr-650 And Mobile Computer
SMR-650-210 Reader and the SMR-650-213 Reader is the length of the cable for the DB-9 connector. The SMR-650-210 Reader has a 1-foot (30.48 cm) cable and the SMR-650-213 Reader has a 9-foot (2.74 m) cable. Savi Mobile Reader SMR-650 User Guide... - Page 6 C H A P T E R About the Savi Mobile Reader SMR-650 and Mobile Computer This guide is primarily designed for use of the SMR-650-212 Reader as packaged in kit models 741G-Kit-C-101x and 751G-Kit-C-101x. It also describes reader functionality, components, and specifications.
-
Page 7: Smr-650 Reader Communication
UHF and LF antennas. Your software determines if you are using UHF or LF commands. The SMR-650-212 Reader works on a wireless or wired LAN so you can download and upload information to and from your database. UHF Mode The UHF transmitter sends commands and write information to Savi RFID tags. -
Page 8: Lf Mode
C H A P T E R About the Savi Mobile Reader SMR-650 and Mobile Computer Figure 1-3 Reset contacts, LEDs, and pin connector (jack) for recharging for SMR-650-210 and SMR-650-213 Reset contacts, LEDs, and pin connector (jack) for SMR-650-210 and SMR-650-213 LF Mode LF mode is controlled by the software running on the mobile computer. - Page 9 ◆ Metal or RF-absorbent surface on the tracked item ◆ Tag location relative to the SMR-650 Reader, such as behind a metal ◆ obstruction or stacked under multiple layers Radio interference also affects the probability of collecting any given tag, and you can expect some variance in repeatability in the field.
-
Page 10: Operating The Mobile Device
About the Savi Mobile Reader SMR-650 and Mobile Computer Operating the Mobile Device The mobile device consists of the SMR-650-212 Reader mounted on an Intermec 751G/A Mobile Computer, which runs the Windows CE .NET 4.2 operating system and includes a 42-character alphanumeric keyboard. The Intermec 751G/A Mobile Computer features a backlight for the keypad. -
Page 11: Intermec 751G/A Mobile Computer Keypad
Gold/White Plane key. For example, the @ symbol shares the K key on the keypad, which means that to enter the @ symbol, you press the Gold/White Plane key and then the K key. Savi Mobile Reader SMR-650 User Guide... -
Page 12: Reset Contacts In Pinholes On The Smr-650
About the Savi Mobile Reader SMR-650 and Mobile Computer Reset Contacts in Pinholes on the SMR-650 For the SMR-650-212 Reader, the reset contacts are located in the pinholes on the unit. For the SMR-650-210 and SMR-650-213 Readers, the reset contacts are located in the pinholes on the cable. -
Page 13: Contacting Savi Support
Call 1-888-994-SAVI (North America only) or 1-408-743-8888 between ◆ 9 a.m. and 5 p.m. Pacific time. When you contact Savi Support by telephone or email, have the following information available: Contact information (company name, your name, email, and phone ◆... - Page 14 C H A P T E R About the Savi Mobile Reader SMR-650 and Mobile Computer...
-
Page 15: Assembling And Using The Intermec Holster
Buckle the leg strap around the middle of your thigh. Adjust the waist and leg straps for a secure fit. Turn the mobile device upside-down. Ensure that the unit is vertical. Insert and slide the mobile device into the holster. Savi Mobile Reader SMR-650 User Guide... - Page 16 C H A P T E R Assembling and Using the Intermec Holster Figure 2-1 Inserting the mobile device into the holster For the instructions that correspond to these photos, see “Inserting the Mobile Device into the Holster” on page 15.
-
Page 17: Recharging Batteries
The SMR-650-212 Reader has a Lithium-Ion internal battery that is not replaceable. To recharge the SMR-650-212 Reader battery, use the power cable and power supply with the 1/8-inch (3.2 mm) jack that Savi provides. You can also use the power cable, power supply, and Intermec dock to recharge the mobile device. - Page 18 C H A P T E R Recharging Batteries Connect the female end of the power cable to the Intermec power supply. Connect female end of the power cable to the power supply Connect the other end of the power supply to the AC adapter on the dock.
- Page 19 The Lithium-Ion internal battery for the SMR-650-210 and SMR-650-213 Readers is not replaceable. To recharge the battery, use the power cable and power supply with the 1/8-inch (3.2 mm) jack that Savi provides. Ensure that your SMR-650-210 or SMR-650-213 Reader is NOT connected to your desktop or notebook computer.
-
Page 20: Determining Available Battery Power
Connect the other end of the power supply to the mobile reader. Determining Available Battery Power You can determine the percentage of battery power available based on the activity of the green LED on the SMR-650 Reader. Wall adapter Application Green LED activity pattern... -
Page 21: Printing Labels
Printing Labels You can print labels using the serial interface cable (Zebra Pt# 52712). Before you attempt to print using the Savi Mobile Reader SMR-650, verify that the Zebra printer is in proper working order by printing a test label. See the Zebra user’s guide for instructions. -
Page 22: Connecting The Printer To The Mobile Device
C H A P T E R Printing Labels Connecting the Printer to the Mobile Device You connect the printer to the mobile device using the Intermec boot. You can also use the Intermec dock to connect to the mobile device. Using the Intermec Boot to Connect to the Mobile Device Retrieve the network cable with a DB-9 and RJ-45 connector. - Page 23 Connecting the Printer to the Mobile Device Connect the DB-9 connector to the bottom of the boot. Insert the RJ-45 connector to the printer port. Use the software on your mobile device to print labels. Savi Mobile Reader SMR-650 User Guide...
-
Page 24: Using The Intermec Dock To Connect To The Mobile Device
C H A P T E R Printing Labels Using the Intermec Dock to Connect to the Mobile Device Retrieve the network cable with a DB-9 and RJ-45 connector. Connect the DB-9 connector to the Intermec dock. - Page 25 Connecting the Printer to the Mobile Device Insert the RJ-45 connector to the printer port. Insert the mobile device into the dock. Use the software on your mobile device to print labels. Savi Mobile Reader SMR-650 User Guide...
- Page 26 C H A P T E R Printing Labels...
- Page 27 Operating temperature: –4°F to +140°F (–20°C to +60°C) ambient; 32°F to +104°F (0°C to +40°C) when charging Humidity: 5 to 95% non-condensing. IP64 compliant. Altitude: Maximum is 40,000 feet (12,192 m); rate of change is 2,000 feet (610 m) per minute Savi Mobile Reader SMR-650 User Guide...
-
Page 28: Asmr-650 Reader Specifications
Modulation: Frequency shift keying, deviation +/- 50 KHz Data rate: 27.8 Kps, 50% duty cycle Air protocol: Batch Collection System (BCS) and Extended Batch Collection System (EBCS) commands; Savi EchoPoint™ Air Protocol 2.1 (two-way UHF commands and seal extension commands) - Page 29 Cable is approximately 5 inches (12.7 cm) in length SMR-650-210 and SMR-650-213: Cable with serial DB-9 interface. Cable for SMR-650-210 is approximately 1 foot (30.48 cm) in length. Cable for SMR-650-213 is approximately 9 feet (2.74 m) in length.
- Page 30 AC adapter: U.S. UL 60950; CSA C22 950; European EN 60950; Savi Mobile Reader SMR-650: US. UL 1604 approved for use in hazardous locations Division 2 Class I Groups A, B, C, and D, Class II Groups F, G, Class III; European EN 60950...
- Page 31 Mobile computer Mounting hardware and bracket attaches the SMR-650-212 mounting Reader to the Intermec 751G/A Mobile Computer. Includes holster Options SMR-650-212 for use with Intermec 751G/A Mobile Computer; SMR-650-210 and SMR-650-213 with DB-9 connectors for use with notebook and desktop PCs...
- Page 32 A P P E N D I X SMR-650 Reader Specifications...
- Page 33 A P P E N D I X Hardware Components The SMR-650-212 is packaged in kits that include the following items: Intermec model 751G/A handheld terminal with alpha keypad, 802.11G ◆ radio (model 751G-Kit-C-101x only), and 2D imager 256 MB memory card (SD format) ◆...
-
Page 34: B Hardware Components
SMR-650-212 Reader with custom Intermec cable SMR-650-210 and SMR-650-213 Reader Components Rechargeable Lithium-Ion battery (internal and non-removable) ◆ AC adapter to recharge the mobile reader internal battery ◆ Figure B-2 SMR-650-210 and SMR-650-213 Reader SMR-650-210 and SMR-650-213 Reader with DB-9 connector...
Need help?
Do you have a question about the SMR-650 and is the answer not in the manual?
Questions and answers