Putting A Call On Hold/Unhold; Making A Second Call; Swapping Between Active Calls And Held Calls; Answering A Second Incoming Call - INNOSTREAM INNO-A21 User Manual

INNO-A21 User's Guide

5.1 Putting a call on hold/unhold

You can put the current call on hold when the call is active state if this service is supported on the
network.
Press [Hold soft key] to hold active call.
To make the held call reactivate, press [Unhold soft key].

5.2 Making a second call

You can make a second call whilst you are in a call.
1. Enter the second phone number or fetch it up via Phonebook option.
2. Press [SEND]. The first call is automatically put on hold if the second call is made.
< Connecting the first participant with another participant>
If you press [Transfer soft key] whilst the second call is being made, the function allows you to
make two participants connect, and then allows you to leave the conversation by itself. Thereafter,
two participants are connected to each other.

5.3 Swapping between active calls and held calls

You can swap calls whilst there are active calls and held calls on conversation.
Press [Swap soft key].
The current active calls are placed on hold and the held calls are reactivated.

5.4 Answering a second incoming call

You will be notified of an incoming call whilst you are in a call. Call waiting tone sounds in the
earpiece, and the display will show that a second call is waiting. This feature, known as Call
Waiting, is only available if the network supports it and if you have set the Call Waiting menu to
Activate.
For details of how to activate and deactivate it, please see Call Waiting menu in Section 10.9.9.
You can answer the second incoming call by pressing [Answer soft key] or [SEND].
The first active call is automatically put on hold, and then the incoming call is active.
PAGE : 25 of 130
INNOSTREAM Confidential