Table of Contents
Advertisement
Preparation of your System Unit
Due to the length of the signal cable on your IBM
Monochrome Display, the IBM Monochrome Display
and Printer Adapter should be installed in slot 7 when
used with the IBM Personal Computer AT Floor
Standing Option.
• Installation instructions for the Monochrome
Display and Printer Adapter are located in this
section.
Warning: To prevent a permanent loss of data on
the fixed disk drive, we recommend that all files be
backed up and that the head be parked before
continuing with this procedure. To back up the data
stored on your fixed disk drive, see the IBM Disk
Operating System manual for a description of the
BACKUP command. To park the head, load your
diagnostic diskette and select option 3, "Prepare
System for Moving".
3-126 Floor Stand
Advertisement
Table of Contents
