1. Manuals
  2. Brands
  3. conoptics Manuals
  4. Laboratory Equipment
  5. 200
  6. Manual

conoptics 200 Manual

Hide thumbs
1
2
3
4
5

Advertisement

Table of Contents

Model 200 Manual

Introduction:

The Model 200 drive electronics is a high power (75W) AC Coupled amplifier capable of output
voltages of 170V Peak-to-Peak. The Model 200 provides an output frequency response of
10KHz-to-200MHz into a 50ohm load.
ConOptics, Inc. 19 Eagle Road, Danbury, CT 06810 Phone 800-748-3349 Fax 203-790-6145
Email: sales@conoptics.com, or visit
www.conoptics.com
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 200 and is the answer not in the manual?

Questions and answers

Related Manuals for conoptics 200

Summary of Contents for conoptics 200

  • Page 1 Model 200 Manual Introduction: The Model 200 drive electronics is a high power (75W) AC Coupled amplifier capable of output voltages of 170V Peak-to-Peak. The Model 200 provides an output frequency response of 10KHz-to-200MHz into a 50ohm load. ConOptics, Inc. 19 Eagle Road, Danbury, CT 06810 Phone 800-748-3349 Fax 203-790-6145 Email: sales@conoptics.com, or visit...
  • Page 2 The Model 200 drive electronics is an AC coupled, amplifier. The amplifier is capable of outputting 170volts P-P into a 50 ohm S.E. load. The driver is designed to interface to Conoptics 2-port 50 ohm Electro-Optic Modulators and beam deflectors. The amplifier requires only 626mv (0dbm) P-P input signal into 50 ohms to deliver its maximum output drive.
  • Page 3 Detected response Below is the typical detected response for the Model 200 driving a Model 350-80 Electro-Optic Modulator. ConOptics, Inc. 19 Eagle Road, Danbury, CT 06810 Phone 800-748-3349 Fax 203-790-6145 Email: sales@conoptics.com, or visit www.conoptics.com...
  • Page 4 Typical System Configuration ConOptics, Inc. 19 Eagle Road, Danbury, CT 06810 Phone 800-748-3349 Fax 203-790-6145 Email: sales@conoptics.com, or visit www.conoptics.com...
  • Page 5 This capability is roughly +/- 450VDC and is adjustable by the front panel pot and monitored by the built in LCD Voltage Meter. ConOptics, Inc. 19 Eagle Road, Danbury, CT 06810 Phone 800-748-3349 Fax 203-790-6145 Email: sales@conoptics.com, or visit...

Table of Contents